REGULAR PRICE: £149.20

About this item

• Integral power level selections
• Four power options – high, Eco, low and cold
• Eco function allowing reduced running costs and minimising electrical wastage
• Ease of control with the new adjustable power dial
• Delivers hot water instantly at point of use eliminating the need to connect to a centrally located hot water cylinder with long pipe runs

Product description

Product Description

The Powerstream Eco delivers hot water instantaneously at the point of use, eliminating the need for a centrally located hot water cylinder and long pipe runs. The compact and unique design offers external power selection with an Eco setting for ease of use and reduced running costs.

With two variants, 9.5kW and 10.8kW, this direct fed water mains unit is ideal for hand basin supply in commercial washrooms and residential applications where access to stored hot water is limited.

Powerstream Eco power selection enables energy management to suit the application and time of year and allows the user to move between four power options – High, Eco, Low and Cold. When running the Powerstream in the Eco setting, the power used to run the unit is reduced, minimising electrical wastage and running costs making it the ideal washroom solution.

Small and compact (307mm x 160mm x 84mm) the Powerstream Eco can be mounted in such a way as to allow pipe entry form the bottom or side and fits neatly under work tops, bathroom cabinets or simply underneath a wash basin.

Simply connect the Powerstream Eco to the mains fed cold water and wire to an electric supply, once plumbed to the basin or shower the Powerstream Eco is ready to use. Capable of supplying hot water to up to 2 basins or a single basin and a manual mixer shower.

The Powerstream Eco is a great way of getting a supply of hot water to out of reach locations having a wide variety of uses in both domestic and commercial applications.

Hand Wash: Capable of supplying hot water to up to two basins or a manual mixer shower and a single basin.

Work Shops/Garages: Already have a cold water supply and want to avoid the cost of plumbing in a supply of hot water, the Powerstream Eco is a simply solution.

Extensions/Loft Conversions/Ensuites: Avoid long pipe runs and difficult installation, Suitable for providing hot water for small basins and a manual mixer shower.

Please note:

The Powerstream is not suitable for supplying hot water to a bath or kitchen sink as the flow rates are not adequate for this type of application.

Flow rates vary during winter and summer months when the temperature of the incoming water changes. The following flow rates are provided as a guide for our 9.5kW Powerstream Eco

Summer Months (average incoming water temperature: 20 degrees) Powerstream Eco will deliver 4 litres per minute: 54 degrees, 5 litres per minute: 47 degrees and 6 litres per minute 42 degrees.

Winter Months (average incoming water temperature: 5 degrees) Powerstream Eco will deliver 4 litres per minute: 39 degrees, 5 litres per minute: 32 degrees and 6 litres per minute 28 degrees.

Technical Data – 9.5kW Powerstream Eco :

Cable size guide: 6/10mmm (please seek advice from a qualified engineer)

Fuse Rating Guide: 40amps

Operating Pressure: 15-150psi

Kilowatt loading @ 230-240v: 8.7 – 9.5

Thermal cut out protection.

Redring are located in Peterborough (Cambridgeshire) and have been designing and manufacturing water heating, water boiling and showering products for over 45 years.

Box Contains

1 x 9.5kW Unvented Instananeous Water Heater
1 x instruction manual