Feeder and camera 2 in 1

Smart pet feeder:

• Easy feeding anywhere
• Scheduled feeding anytime
• Preset feeding sound
• Prevent overfeeding
• Dual power supply

Pet camera:

• 1080P HD camera
• Motion Detection
• IR Night vision
• Two-way Audio
• Pet monitor
• Multi-user sharing

Automatic door cover:

Feeder Pro vision has a protective cover and is reinforced with screws.

• Further prevent pets from being caught by the auto door.
• Prevent food doors from being damaged by pets.
• Prevent sunlight from interfering with the infrared sensor.
• Easy installation and removal.

Sealed&Big food storage:

Easy to install with quick release and easy to clean.

• Large container for storing pet food for up to one month.
• The lid and bottom of the barrel are designed with sealing rings, keep pet food fresh.

Non-slip silicone is attached to the bottom of the Skymee food dispenser to prevent it from being knocked down by pets.

Dual power supply

Skymee pet feeder can automatically switch to battery power when the power is interrupted at home, so that the feeding plan will proceed as usual. (Single battery * 3 is not incluaded)

Kindly notes:

• It is recommended to load the battery with the USB cable energized to ensure that the power can be switched smoothly.
• After loading the battery (D cell), please turn on the battery switch on the bottom of the feeder.
• It is recommended to set up a feeding plan after three minutes and unplug the power to check if the feeding plan is working properly.
• Under battery power, the app cannot operate and view the video, and Skymee food dispenser can only work according to the set feeding schedule until the power is restored.

More details:

• Package comes with non-slip silicone contacts and 3 bracket to, which can be replaced as needed.
• If yours is a kitten, it is recommended to use only silicone contacts to make the footprint smaller.
• About overfeeding: If there is too much food when feeding, the telescopic door will block the food outlet to prevent food from spilling out of the food bowl. When your pet finishes eating the food in front, the remaining food will automatically fall, and the door will automatically close.

Before connection (Only supports 2.4G WiFi):

1. Scan QR code and download Skymee App.
2. Load 3 D batteries at the bottom and turn on the switch. (optional)
3. Power on the device using the USB cable.

WIFI connection:

1. Open the Skymee app and register your app account via email or mobile number.
2. Click Add a device in the top right corner, and click Add automatic feeder.
3. Enter the correct 2.4GWIFI password, and the APP QR code is facing the device camera.

Set up feeding plan after successful connection:

When you hear the the ring “beep”, click Next and wait for the connection to succeed.

• Then you can set up the feeding plan(1~8), feeding time(0:00~24:00), portion(1~30), and date(Sat.~Sun.) etc..
• You can share your account with your family's mobile phone and watch live video together.
• You can chat and interact with your pet anytime, anywhere.

Some advices if the WIFI connection fails:

1. Check wifi: (a) 2.4Ghz wifi.(b) Password does not exceed 16 characters (c) Password is entered correctly.
2. Reset device: use a pin/pen insert the device reset hole for 5 seconds, reset the device.
3. When adding a device to the app, select [smart feeder] instead of wifi feeder.
4. Please use the APP to contact online support.