Trend LOCK/JIG For Routing Face-Plate Recess and Mortise-Doorlock Installation Tool, Black, 34-58mm Wide Doors
Trend LOCK/JIG For Routing Face-Plate Recess and Mortise – Doorlock Installation Tool
- QUICK AND SECURE: With its tool-free setup, the Trend Lock Jig is very fast to set to any door width from 34mm to 58mm wide; Full-length clamping plate ensures jig remains rock solid in use, secured with locking levers and twin clamping knobs
- ADJUSTABLE SIZES: The set of 12 lock face plate and 4 lock case templates supplied are held in the Lock Jig with magnets for fast swapping, requiring just one router and cutter to do both the lock case mortice and the faceplate
- FULL INSTRUCTIONS: A comprehensive laminated reference sheet with common lock model also offers a secondary chart on the reverse side for info relating to faceplate and lock case sizes to quickly select the correct templates and achieve perfect results
- EASY TO USE: Each template is stamped to indicate the locks it can be used with; 4-lettered plates for lock cases and 12-numbered plates for the faceplates; Simplifying and speeding up the selection process as well as eliminating costly errors
- NEEDED ACCESSORIES: To rout the lock case mortice, a router with an 80mm plunge and fitted with a 30mm guide bush is required, along with a suitable 12mm diameter cutter with an overall length of 115mm to achieve the maximum mortice depth of 70mm
| SKU: | B000Y8T9VO |
| Weight: | 4.5 kg |
| Size: | 34-58mm Wide Doors |
| Dimensions: | 6.8 x 41.5 x 15.5 cm; 4.5 Kilograms |
| Model: | LOCK/JIG |
| Part: | LOCK/JIG |
| Colour: | Black |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Trend |
| Quantity: | 1 |
| Size: | 34-58mm Wide Doors |
From the manufacturer
For most common sash mortise and dead locks, with up to 2-3/4” or 70mm deep mortises and a 7/8” or 1” faceplate
Fast, clean and accurate results on doors 34mm to 58mm thick, even in hardwood
Precision manufactured plates and body
The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush and 12mm diameter long reach cutter
 |  |  |  |  | | |
|---|---|---|---|---|---|---|
| Door Thickness | 34mm to 58mm | |||||
| Template Outer Size | 234.3 x 59.8 x1.5mm | |||||
| Barrel Size | 33 mm x 17/10 mm | |||||
| Finished Hole Size | 35mm x 19/12 mm | |||||
| Backset | 44 mm & 57 mm | |||||
| Handle Spindle Hole | 16 mm | |||||
| Size | 490 mm x 101 mm | |||||
| Length | 70 mm | |||||
| Width | 29 mm | |||||
| Compatible with LOCK/JIG | ✓ | ✓ | ✓ | ✓ | ✓ |