【Upgraded】LINOVISION POE IP Over Coax EOC Converter Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable for Upgrading Analog Surveillance System to IP Surveillance System (Conv-EOC)
REGULAR PRICE: £74.99
About this item
- This fits your .
- by entering your model number.
- 【PoE & IP OVER COAX TRANSMISSION】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices
- 【UPGRADED: POE & IP OVER TWIST PAIR TRANSMISSION】：Each pair of EOC Converter is equipped with 2 BNC to Twist Pair connectors in our new version, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart.
- 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1″x2.0″x0.9″) and light weight.
- 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable, so as being used with twist pair. EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
- 【WORRY FREE】1 year warranty, Global after-hour support.
| SKU: | B07G194BQD |
| Weight: | 250 g |
| Dimensions: | 7.87 x 5.08 x 2.29 cm; 250 Grams |
| Brand: | LINOVISION |
| Model: | Conv-EOC |
| Colour: | White |
| Batteries Included: | No |
| Manufacture: | Linovision |
| Colour: | White |
Product Description
EOC (Ethernet over Coax) Converter, also known as IP Over Coax Converter is used to transmit Video & Audio & Data over existing coaxial cables (RG59 or RG6). Linovision EOC converter has some unique features, like POE power + data transmission, up to 3,000ft long-reach ethernet over coax extender and no DC12V power is required.
Outstanding Features:
- Ethernet + Power transmission over one coaxial cable, perfect to upgrade existing coax camera systems to IP surveillance systems without replacing cables.
- Up to 3,300 ft (1,000 meters) point-to-point transmission, no extender or repeater is required.
- No power adapter is required (EOC-Receiver should be powered by POE)
- Compact dimension 79mm×52mm×23mm (3.1“x2.0”x0.9”), easily to fit in water-proof housing and camera bracket
- Industrial design, with built-in heat sink, ensure super reliability and hassle-free transmission.
- Plug-n-play operation, no configuration is required.
- Support Ethernet + Power transmission over twist pair cable, power line or other two-pin cables (twist pair cable connector is included in package)
- Compatible to IEEE802.3af/IEEE802.3at POE protocol, max 21W POE load capacity in 100m (330ft) , or 11W POE load capacity in 300m (1000ft).
Applications:
This EOC converter is very useful in these scenarios:
– Upgrade analog coax camera systems to IP video surveillance systems without replacing existing coaxial cables
– Long reach ethernet data extender to max. 1000 meters (or 3,300 ft) without repeater.
– Data and Power transmission in elevators, underwater video system, or any location with two-pin cables
Package Includes:
- 1 * EOC Transmitter
- 1 * EOC Receiver
- 2 * BNC to Twist Pair Connector
- 1 * User Manual
- 2 * Pack of installation screws
Unique Features Compared with Competitors
| | | |
|---|---|---|
Industrial designIndustrial design, with built-in heat sink Ensure super reliability and hassle-free transmission. | POE power + Data transmissionIt can provide power to remote POE device with max.30W power consumption and no local DC power adapter is required. | Ethernet + Power transmission over twist pair cableEthernet over Twist pair cable, power line, or almost any two-pin cables (2020 upgraded function) |
Connection Diagram
Applications in below scenarios
General EOC Applications
- Upgrade traditional analogue system to IP surveillance system while using existing coaxial cable(RG59 cable)
- Remote power & network transmission for VoIP phone, WiFi AP (POE enabled) over coaxial cable
EOC Application in Elevator(2020 Upgraded)
- Transmit POE power and IP data over coaxial or twist pair cable. One passive EOC-transmitter will be put inside the elevator cart to feed camera or signal board, and one EOC-receiver will be in the control room, powered by POE switch/POE injector/POE NVR.
- For multiple elevators application, one EOC-Switch04 or EOC-Switch24 will be put in the control room, working together with max 8 elevators.
FAQ
Q: Why my POE device is offline when working with our EOC (IP Over Coax) Converter?
A: Several main reasons are as follow:
1. Because of reverse connection. EOC transmitter should be connected to POE device (IPC/VoIP), and EOC receiver is connected to POE supply device (POE NVR, POE Switch or POE Injector).
2. It is used for point-to-point coax cable direct connection ONLY, no BNC repeater/T-connect/splitter in the middle.
3. Because of insufficient load capacity. The maximum load capacity is 21W in 300ft transmission which is sufficient to power a regular IP PTZ camera. The load capacity can be at least 11W in 1000ft transmission which is sufficient to power most of IP cameras or VoIP phones.
4. Because of no power supply. Please be informed that EOC receiver has to be connected to an POE NVR, POE Switch or POE Injector to be powered.