Xvive U2 Wireless Digital Transmitter/Receiver System for Guitar, Bass and Other Instruments, Rechargeable, 2.4 GHz Black
REGULAR PRICE: £103.95
- This fits your .
- by entering your model number.
- Operation Guide:
- Transmitter plugs into the Guitar (you instruments), the receiver plugs into the effects pedal, AMP, Audio, etc.
- Turn on the Transmitter and the receiver and check the LED blue lights flashing times and make sure the blue led lights have same flashing times which means transmitter and receiver are in both same channels.
- After connecting successfully, LED lights on receiver will keep light on.
- Now, let’s rock together.
| SKU: | B01N4DSQBR |
| Weight: | 63.5 g |
| Dimensions: | 11.43 x 3.05 x 4.01 cm; 63.5 Grams |
| Model: | U2-1 |
| Colour: | Black |
| Batteries Included: | 1 Lithium Polymer batteries required. (included) |
| Colour: | Black |
From the manufacturer
Xvive U2, a wireless digital audio transmission system for guitar and bass with excellent quality, easy setup and extremely compact. Frequency response covers the spectrum from 20Hz to 20kHz ensuring respect for your sound.
Xvive U2 has 4 different tuning channels, allowing you to simultaneously use up to 4 different systems in the same set-up, or set one of the four channels to avoid any interference you might encounter in some situations. In principle, in the presence of only one Xvive U2 system, it is recommended to use channel 1. You can use multiple tuned receivers on the same channel as the transmitter to connect your guitar or bass to different inputs.
Note: It is recommended to use the receiver at a distance of at least 3 meters from other devices operating on the 2.4 GHz band (for example from WIFI routers).
Red LED indicates normal operation and will start flashing when the built-in battery runs below the recommended threshold.
When charging the red LED of the modules will light up, then turn off automatically when finished
Supplied with the Xvive U2 you will find a “Y” USB cable that allows you to simultaneously charge the transmitter and receiver.
- Operating band: 2.4GHz ISM – 4 channels
- Autonomy: 5 hours
- Digital audio signal: 24 bit/48KHz (not compressed)
- Dynamic range: >103dB (weighed A)
- Frequency Response: 20Hz/20kHz, +1/-3dBperage: 20 linear meters
- THD + Noise: <0.05% (1KHz@-10dbFS)
- Latency: 6ms
- Lithium-ion batteries – r charging: via USB
Xvive U2 operates on 2.4GHz ISM band with a latency of only 6ms and coverage of about 20 linear meters. Built-in lithium-ion batteries have a battery life of 5 hours for each full charge via USB. The transmitter and receiver shells have been manufactured with a robust ABS plastic, they are lightweight and durable as required by use on stage. The success of Xvive U2 on the market is due to its ease of use and minimal footprint.
Transmitter and receiver fit into the output of your instrument and in the input of your headboard, a pedal, a mixer, a preamp or directly into your sound card. The transmitter and receiver shells are freely adjustable so you can place them as you like.
1. Connect the transmitter to the guitar or bass and receiver to the headboard, mixer, pedal, or other
2. Turn on the transmitter and receiver and make sure the blue LED of both emit the same number of flashes to confirm the tuning on the same channel.
3. After alignment, the LED will remain fixed access.
4. It sounds!
