REGULAR PRICE: £41.78

About this item

• Product size: 156mm * 96mm * 58mm.
• Timing maximum time: 999 hours 59 minutes 59 seconds, resolution accuracy: 1 second.
• This discharge tester is used for testing a battery or power bank.
• Working pressure: 80 ~ 106kPa.
• This is a device used to simulate an electrical load, usually for testing purposes.

Product description

Product description:
It is designed with a aluminum heat sink and a cooling fan for better heat dissipation.
Power measurement range: 0000.00 ~ 150W, resolution accuracy: 0.01W.
These is a small LCD display that you can check voltage, current and capacity.
USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Electronic Load Tester Battery Capacity Tester Module Intelligent Discharge Resistance Power Tester.
It can also be used to test current of a USB cable so you could judge if the cable is of good quality
Parameters:
Input Interface / Output Interface: 100A High Current Bite Screw Stud
Voltage measurement range: 0.00V ~ 200V, resolution accuracy: 0.01V
Current measurement range: 0.00A ~ 20A, resolution accuracy: 0.01A
Capacity accumulation range: 0 ~ 999.999Ah, resolution accuracy: 0.01Ah
Power accumulation range: 0 ~ 9999.9Wh, resolution accuracy: 0.01Wh
Power measurement range: 0000.00 ~ 150W, resolution accuracy: 0.01W
Impedance measurement range: 1 ~ 999.9 Europe, resolution accuracy: 0.01 Europe
Temperature measurement range: 0 ~ 99 ?, resolution accuracy: 1 ?
Timing maximum time: 999 hours 59 minutes 59 seconds, resolution accuracy: 1 second
Refresh time: gt; 500mS / times
Measurement rate: about 0.5 times / sec
Overvoltage overcurrent set the alarm mode: show alert interface to remind the user
Overpressure reminder setting range: 1 ~ 200V
Low voltage reminder setting range: 0 ~ 190V
Overflow reminder set range: 0.2 ~ 100A
Product size: 156mm * 96mm * 58mm
Operating temperature: -10 ~ +60 ?
Working humidity: 10 ~ 80 (no doubt)
Working pressure: 80 ~ 106kPa

Note:
Exceeding the