Bosch Professional 601010008 Wall Scanner D-tect 150 SV (Max. Detection Depth Wood/Live Cables/Plastic Pipes/Metal: 40/60/80/150 mm, in Cardboard Box), 11.99 cm*22.0 cm*9.7 cm
REGULAR PRICE: £583.59
- Radar Technology: The stud detector uses Bosch-patented radar technology to detect all object types, including live and non-live cables, water-filled plastic pipes, and magnetic and non-magnetic metal
- Material Classification: The cable detector also indicates the type of material found, including a live wire warning
- 7 Detection Settings: Choose from 6 detection settings based on wall type—Universal, Wet, or Special Concrete, Drywall, Panel Heating, and Metal—or Signal View mode
- Suitable for Wet Concrete: Thanks to the Wet Concrete mode, the stud detector can even detect objects in wet concrete at depths of up to 60 mm
- ITEMS INCLUDED: Wall Scanner D-tect 150 SV, protective bag and 4 x AA batteries
| SKU: | B00714AN2S |
| Weight: | 650 g |
| Dimensions: | 22 x 9.7 x 11.99 cm; 650 Grams |
| Model: | 0601010008 |
| Part: | 0601010008 |
| Pack Quantity: | 1 |
| Batteries Required: | Yes |
| Batteries Included: | Alkaline |
| Manufacture: | Bosch Professional |
| Quantity: | 1 |
From the manufacturer
-
Radar Technology
Thanks to Bosch-patented radar technology, the device can detect all object types with high accuracy, including wooden studs, magnetic and non/magnetic metals, water-filled plastic pipes, and cables
-
Material Classification
An icon shows the type of material detected—magnetic metal, non-magnetic metal, a non-metal object or a live wire
-
Signal View
Displays the incoming signal strength, which helps detect objects in difficult scenarios or provides additional information to experienced users
Product Comparison
 D-tect 150 SV |  D-tect 150 |  D-tect 120 |  GMS 120 | |
| Max. detection depth | 150 mm | 150 mm | 120 mm | 120 mm |
| Metal | ✔ | ✔ | ✔ | ✔ |
| Live wires | ✔ | ✔ | ✔ | ✔ |
| Non-live cables | ✔ | ✔ | ✔ | ✘ |
| Plastic Pipes | ✔ | ✔ | ✔ | ✘ |
| Wood | ✔ | ✔ | ✔ | ✔ |
| Material classification | Live-wire/Metal | Live-wire/Metal | Live-wire | Live-wire/Metal |
| Bosch Radar Technology | ✔ | ✔ | ✔ | ✘ |
| Spot measurement | ✘ | ✘ | ✔ | ✘ |
| Depth indication | ✔ | ✔ | ✘ | ✘ |
| Display max. drilling depth | ✘ | ✔ | ✘ | ✘ |
| Display object depth | ✔ | ✘ | ✔ | ✘ |
Why don’t I see the detected objects immediately when moving the device over them?
The device gathers data not only from above the object, but also from surrounding area. If possible, move the device over the area of interest with an additional 10 cm on each side. Then move the device back and check the detection results.
What exactly do I see on the display?
Object view shows detected objects as black dots. If a dot appears exactly on the centre line, the detected object is directly below the middle of the tool. The different positions on the vertical axes mean different depths of the detected objects.
I am getting the slipping wheel warning. What can I do?
The rear wheels have sensors to know the position of measurements. If the contact between these two wheels and the wall is not firm you can get this warning. Try to increase the pressure to the rear wheels slightly to eliminate this warning.
I need to measure very close to a corner. How can I do that?
The D-tect 150 SV cannot detect objects that are closer to a corner than 10 cm. In this case, the D-tect 120 can be used, as it can detect objects that are only a few centimetres away from the corner.
I need to follow a cable. How can I do this?
D-tect 150 SV needs to scan the cable’s next potential position and only moves side-to-side. Following objects is easier with D-tect 120, as it moves in all directions and has a navigation system to find the centre of the object.