Dryrod Damp Proofing Rods (50 Pack) – Next Generation Rising Damp Treatment from The Makers of Dryzone
REGULAR PRICE: £99.99
- 🗸 Dryrod Damp-Proofing Rods Next Generation DPC – The most effective form of damp proofing for walls; outperforms creams, gels or liquids.
- 🗸 Fast & Simple to Install DIY rising damp treatment. Less messy than older traditional damp course injection creams or liquids
- 🗸 No specialist equipment required – simply insert into 12mm holes in the mortar lines of a building to form a powerful waterproof barrier
- 🗸 Exact Dosage – Delivers the correct dose every time eliminating guesswork. Dryrod Pack of 50 Coverage (for 9″ wall): 6m
- 🗸 BBA Approved – The High-Performance DPC Treatment is Certified by the British Board of Agrément to be effective against the ingress of moisture for at least 20 years
| SKU: | B00KDHSFHA |
| Weight: | 1 kg |
| Size: | 50 Pack |
| Dimensions: | 27 x 17.2 x 7.9 cm; 1 Kilograms |
| Model: | 1715010 |
| Part: | 1715010 |
| Pack Quantity: | 1 |
| Batteries Required: | No |
| Batteries Included: | No |
| Manufacture: | Safeguard Europe Ltd |
| Quantity: | 1 |
| Size: | 50 Pack |
Product Description
Dryrod Damp-Proofing Rods eliminate rising damp without the need for specialist equipment. Simply drill and install.
Produced by Safeguard Europe Ltd
Dryrod Damp-Proofing Rods are developed and produced by Safeguard Europe Ltd, the UK's leading developer, manufacturer & supplier of damp-proofing and waterproofing materials to the construction industry.
Dryrod Damp-Proofing Rods
The Ultimate Rising Damp Treatment
Dryrod Damp-Proofing Rods are patented fibre rods that carry a powerful water-repellent material. They are simply inserted into holes drilled at regular intervals along a mortar course. Once inserted, the rods diffuse their water-repellent material along the mortar course, curing to form an effective barrier to rising damp.
They have been scientifically proven to eliminate rising damp even in highly-saturated walls. This performance has also been internationally tested and approved.
- Eliminates rising damp without needing specialist pumps or injection tools
- Simple installation procedure – Just drill, clear and install
- Outperforms competing treatments, even in highly-saturated walls
- 100% active ingredient patented technology
- Extensively tested and internationally approved
Three Simple Steps to a Damp-Free Wall
| | | |
|---|---|---|
1. DrillA row of holes should be drilled at 120 mm intervals along a continuous horizontal mortar course using a 12 mm drill bit. For standard 9″ thick walls, the drill hole depth should be 210 mm. | 2. ClearExcess debris should be cleared from the hole using a Dryrod Hole Clearing Tool or a suitable vacuum cleaner. | 3. InstallInsert a single Dryrod Damp-Proofing Rod into each hole, ensuring that they are recessed approximately 5 mm from the brick face without forcing the rod into the hole. |
Dryrods Deliver the Correct Dose Every Time
Traditional rising damp treatment methods utilise cream or liquid injection. These methods can be prone to operator error leading to under-treatment and DPC failure. Due to their unique patented design, Dryrod Damp-Proofing Rods deliver the correct dose of active ingredient every time.
Extensively Tested and Internationally Approved
Laboratory testing has proven that Dryrod Damp-Proofing Rods out-perform competing treatment methods, even in highly-saturated walls and freezing temperatures. They have also been approved by the British Board of Agrement and the German WTA organization.
100% Active Ingredient for Maximum Water Repellency
It is not possible to infuse 100% pure active ingredient into a traditional Damp-Proofing Cream. Thanks to their unique fibre rods, Dryrod Damp-Proofing Rods are saturated with 100% silane/siloxane. Only the pure active ingredient diffuses into the wall, in a controlled dose that ensures consistent application. Cheaper creams may seem more attractive, but they often only contain around 25%-50% active ingredient. They cannot out-perform Dryrod.
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Description: | A kit containing all the tools and rods required to treat approximately 6 linear meters of 9″ thick wall. | A multi-pack of 5 foil Dryrod packs, each containing 10 Dryrod Damp-Proofing Rods. | A foil-wrapped pack containing 10 Dryrod Damp-Proofing Rods. | A metal tool specifically designed to clear debris out of drill holes in preparation for Dryrod insertion. | A cutting tool to cut rods to size for walls thinner than 9″ thickness. | A high-quality SDS masonry drill bit that is the correct size for Dryrod Damp-Proofing Rods. |