SEBSON 4x Wireless Smoke Alarm Linkable incl. Magnetic Fixing, Smoke and Heat Detector, Photoelectric, Battery included, DIN EN 14604, VdS 3131- Ø120x36mm
REGULAR PRICE: £74.99
About this item
- SEBSON Wireless Smoke and Heat Alarm GS558 with replaceable AA batteries, including Magnetic holder.
- The smoke detector also has an integrated heat detector which triggers the alarm at an unusually high room temperature. Heat sensitivity: +54°C until +70°C.
- When smoke or heat triggers an alarm, all networked smoke detectors in your household will trigger the alarm.
- Up to 15 smoke alarm detectors of this type can be connected together. The radio range is about 20m, depending on local conditions.
- Clean and quick installation with the self-adhesive magnetic holder.
SKU: | B0743D26FS |
Weight: | 640 g |
Size: | Pack of 4 |
Dimensions: | 12 x 12 x 3.6 cm; 640 Grams |
Model: | 4_X_SD_SET_GS558_MS |
Part: | 4_X_SD_SET_GS558_MS |
Colour: | White |
Pack Quantity: | 4 |
Batteries Required: | Yes |
Batteries Included: | Alkaline |
Manufacture: | SEBSON |
Colour: | White |
Quantity: | 4 |
Size: | Pack of 4 |
Product Description
Radio linked smoke and heat detector GS558
Protect yourself and your family even better with the GS558 wireless smoke and heat detector, which activates the alarm in the event of excessive smoke and unusually high room temperatures.
Product features
- Model: GS558 (radio linked smoke and heat detector)
- Dimensions: Ø120x36mm
- Temperature range: 54° to +70°C
- Alarm volume: ≥ 85dB (A) within 3 meters
- Certifications: EN 14604
- Battery specification: 2 x 1.5V batteries type AA
Connectable smoke and heat detector in one
DIN EN 14604 certified
Interlinked wireless smoke alarms offer even better protection, as you can no longer miss a warning signal if it is activated in a distant room. All networked smoke detectors will activate the alarm when an alarm detects smoke and excessive heat. The self test, which is performed every 40 seconds, shows that you are protected. You can also use the test button to perform a test yourself at any time.
- Early warning system for low battery
- Self test every 40 seconds
- Radio frequency: 433MHz
- Radio range: approx. 20m (depending on local conditions)
- Connectivity: Up to 15 wireless smoke alarms
Incl. magnetic holder for quick and easy mounting
With the magnetic holder for smoke detectors you can easily and quickly attach your smoke detectors. The magnetic holder consists of two self adhesive magnetic pads. These magnetic pads each have a strong self adhesive material (3M adhesive) on one side. One magnetic pad is attached to the ceiling and the other to the back of the smoke detector. The magnetic attachment or magnetic holder is not suitable for vinyl wallpaper, polystyrene, non-stick, siliconised or teflon coated surfaces.
Specifications
|
|
|
|
---|---|---|---|
DIN EN 14604Our smoke alarms are all tested and certified according to the DIN EN 14604 standard. This means that the smoke detector fulfils legal requirements and performance criteria which are specified in the product standard. | Integrated heat detectorThis smoke detector not only sounds the alarm when smoke enters the inside of the device, but also when the room temperature is above 54°C. This means that excessive heat also causes the alarm to go off. | Photoelectric smoke detectorThe core of a photoelectronic smoke detector is the “optical chamber”. The optical chamber contains an infrared light emitting diode and a sensitive light sensor. As soon as smoke enters the optical chamber, the light is scattered. When the scattering causes sufficient light to fall on the sensitive light sensor, the alarm is activated. | Radio linked smoke detectorUp to 15 smoke alarms of this type can be networked together. The radio range is designed for apartments and single-family homes and is approx. 20m, depending on local conditions. |