Typec USB 10G to NVME Dual-Bay NVME Docking Station for M2 SSD Key M, Supports Offline Clone Duplicator and Auto Sleep Function, Gray, Clone Nvme

REGULAR PRICE: £93.99

About this item

by entering your model number.
【Easy to use】 SSD not included. This ANYOYO NVME docking station can copy offline without having to connect to a computer, file data, audio and video data. When you connect to the computer, read the hard drive, safely exit, and clone again. It can help you clone easily and protect the NVME case and SSD.
【High performance】 Plug and play, no drivers required. Supports hard drives up to 8 TB. Reads two hard drives at the same time. Please be reminded that the capacity of the destination SSD must be the same as or equal to the original SSD. If you are using an SSD with the same capacity, please make sure that the same capacity is displayed on the computer, otherwise it cannot be cloned successfully.
【Amazing transfer speed】 Achieve a USB data transfer of 10 Gbit / s from the NVM Express PCI-e SSD to the host PC, MacBook and NAS hard drive station. When USB3.1 Gen2 reaches its limits, the R / W speed reaches speeds of up to 992 MB / s with most NVMes.
【Efficient heat dissipation】 Stereo solid state hard drive box offline clone base, fast heat dissipation, better hard drive protection.
【Confirm the SSD interface before ordering.】 This NVME docking station only supports the NVME interface. Support most PCIe NVMe M-key or B + M-key SSDs.

SKU:	B097HC1HHJ
Dimensions:	15.4 x 9.4 x 6.9 cm; 350 Grams
Model:	UK-AC-M03
Manufacture:	ANYOYO
Origin:	China

Check Offer Price

Product Description

USB 3.1 Gen2 10Gbps Dual-Bay NVME Docking Station,Lay-Flat External Hard Drive Docking Station for M2 SSD Key M, Support Offline Clone Function and Tool-Free Installation.

Provides Ultra-fast access for reading and writing on up to 2 Solid State Drive simultaneously. Offers faster read (992MB/S) /write (952.4MB/S) data speeds to and from M.2 NVMe SSD.

You will never regret to have one.

SSD whole copy function without PC

SSD copying (cloning) is possible at the push of a button without using a personal computer.

To access NVME with a PC: Once you attach power and Type-C USB, you're ready to go. Carefully insert the NVME SSD into the slot(s) of your choice and push the power button on the back of the dock. Wait a few seconds, and the dock should enumerate in Windows. Depending on the state of the SSD, you'll either need to go to Drive Manager to initialize and format the SSD's, or they could just pop-up in Explorer, ready to use.

For Standalone Duplication: Plug the target SSD into Slot B (the front of the dock, closest to the clone button), and plug the source SSD into slot A (the end were the power adapter connects). Target SSD capacity must be ≥ Source SSD capacity. Press and hold the power button for ~3 seconds to begin the clone process. LED's on the front top of the dock indicate clone progress – 25%, 50%, 75% and 100%.

please note:

1. Do not connect to the computer during use.

2. SSD condition: If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors.

3. Make sure that the two SSD disks can be recognized on the computer when plug in our nvme enclosure.If not, it could not clone.


Compatibility: Windows, macOS, and Linux File systems may be operating system specific preventing the drive from recognizing correctly on systems with different operating systems	This dock makes processing M.2 NVME SSD's SUPER easy and convenient. It can also enable mishandling and ignorance.	Compact, freestanding design making dissipates heat and exhaust efficiently, aluminum construction protects the drive from overheating and reduces vibration. ● Make sure the small fine pitch connectors don't get contamination in them and check them before inserting an SSD! ● Ensure very careful insertion and removal into the slots, and only when the power is off! ● Don't tilt or bend your SSD's during insertion or removal and never force them into the slots!