100ft Irrigation Drip Kit,Garden Irrigation System,1/4″ Blank Distribution

100ft Irrigation Drip Kit,Garden Irrigation System,1/4″ Blank Distribution Tubing Watering Drip Kit/DIY Saving Water Automatic Irrigation Equipment Set for Garden Greenhouse, Flower Bed,Patio,Law

• 【Upgrade Adjustable Drip Irrigation Set】：The irrigation pipe is made of high-quality , UV-resistant material ABS, which can adjust the amount of water and enable the delivery of precise watering system.
• 【Energy Saving And Environmental Protection】：Our products use tap water spray to cool down directly, no electricity consumption, no energy consumption, very environmental protection. It could provide everything needed to apply launch tubes in garden areas and spray water in widely distributed plants . Custom drip irrigation system saves up to 70% in water savings compared to manual watering.
• 【Easy To Install】：Simple installation, no need for digging or plumbing skills. The self-service garden irrigation spray kit will bring a lot of fun during the installation process and you will have a wonderful cooling system or garden watering system
• 【Applicable Widely】：The automatic irrigation kit is suitable for any place you want, such as swimming pool balcony cooling plant watering, vegetable garden, lawn atomization, fog cooling system, dust removal, garden humidification.
• 【Installation Tips】 ：The amount of water from the dripper is affected by water pressure and other factors. If the water pressure is low, the water output at the end is poor. It is recommended to use multiple tubes at the same time, each tube connecting a certain number of drip heads according to the actual water pressure.

30m Irrigation System Garden, Irrigation Kit Automatic Irrigation Automatic Sprinkler Drip Irrigation Kit Garden Irrigation for Landscape, Flower Bed, Patio Plants

>The microjets can be adjusted to change the size of the mist or even shut it off.

>No need to dig or do plumbing work. Cut the hose itself, adjust the dimensions to local conditions with a fixed spindle, more suitable.

Weight: 962 g
Color: Black
Package size: 22 * 17 * 11.4cm
Material: rubber and plastic

Package contents:

Super Cost-Effective Package Content:
1* 4mm PE tubing (30M) for conveying water
1* 2-ways Hose Splitter
2* 4mm Tubing Quick Connector
1* Threaded Faucet Connector
1* Teflon tape
30* Red Drippers
20* Mist Nozzles
20* 4mm Flat Tee Connector
30* Support Stakes
30* 3Way Tee Connector
2* End cap
10* Single Connector

Note:

1. The amount of water from the dropper is affected by water pressure and other factors. When the water pressure is low, the water performance is poor at the end. It is recommended to use several pipes at the same time. Each pipe connects a certain number of drip heads according to the actual water pressure.
2. Soak the end of the hose in hot water for one minute before sliding on the fittings. It gets easier and when it cools, the tube will stay firm.
3. If possible, use the water tap fitting, otherwise the rubber hose may slip at high water pressure.