DK SONIC Professional Ultrasonic Cleaner with Heater Basket Digital Timer
DK SONIC Professional Ultrasonic Cleaner with Heater Basket Digital Timer for Jewelry,Ring,Eyeglasses,Denture,Watchband,Coins,Small Metal Parts,Circuit Board etc (10L-S, S)
- Multiple Cleaning Modes for an Extensive cleaning Range: Fullwave,Semiwave,Degas Cleaning Modes based on 40KHz ultrasonic frequency make the device applicable for rough surface cleaning and intensive rinse. Generally, fullwave cleaing mode is used for making intensive rinse, while semwave is used for rough surface cleaning.
- Digital Control Panel with LED Display and Memory Function: Digital control panel can make the device be operated more convenient and accurately, and therefore make the device have a long service life; especially the preset cleaning time and heating temperature can be memorized by the device even after power-off unless it is reset manually.
- SUS304 Stainless Steel Drain Valve and Die-casting Tank: Both the cleaning tank and drain valve of the device are made with SUS304 stainless steel materials, and it makes the device be resistant to weak acid and weak alkali.
- Free time setting among 1~99 minutes: Extensive time-setting range makes the device be freely set to work for any certain time within 99 minutes based on the characters of the stuffs to be cleaned.
- 20~80°C Heating Range for Degreasing and Dewaxing: Heating function is helpful for reducing the adhesion strength of oil and wax so as to improve the cleaning effect, and generally the best cleaning temperature is among 40~60°C, i.e. 104~140°F.
SKU: | B08N66YF3H |
Weight: | 8 kg |
Size: | 10L-S |
Dimensions: | 32.51 x 26.67 x 30.99 cm; 8 Kilograms |
Model: | DK-1000S |
Part: | DK-1000S |
Colour: | S |
Batteries Required: | No |
Manufacture: | DK SONIC |
Size: | 10L-S |
Product Description
Fullwave(40KHz) for Cleaning Bland Holes
Under the same ultrasonic intensity, 40KHz ultrasonic wave can create more cavitation quantity, and do much better in penetration, than ultrasonic wave close to 20KHz. So 40KHz ultrasonic wave does well in cleaning stuffs with complex-shaped surface or blind holes. Especially, 40KHz ultrasonic wave causes much lower noise than ultrasonic waves close to 20KHz.
Semiwave(28KHz) for gross rinse of simple surfaces
SEMIWAVE mode is the semiwave mode of 40KHz ultrasonic wave, however, it can also be identified by an oscilloscope as 28KHz. Its penetration performance is not as good as 40KHz, but it does well in cleaning stuffs with simple-shaped surfaces. Especially, SEMIWAVE ultrasonic wave causes much lower noise than single-frequency 28KHz or 40KHz ultrasonic wave.
Heating Function to Remove Oil and Wax
SUS304 stainless steel does better in resistance to alkali solution and most organic and inorganic acid than SUS201 or other SUS200 stainless steel series. However, SUS304 stainless steel has no resistance to solution with chloridions, such as hydrochloric acid, and hydrofluoric acid.
Note: Please don't use flammable, explosive or volatile cleaning solution.
Degas Mode for removing ultrasonic fatigue
DEGAS mode is an intermittent cleaning mode to remove residual bubbles(no cavitation nucleus) which can increase the loss of ultrasonic transmission and decrease the blast strength of cavitations in the cleaning solution. So it is a cleaning mode for removing ultrasonic fatigue to improve cleaning effect.