Kemper 5740301500 Frost-Proof External Tap

• Optional with lockable operating handle figure, item number 575 00 003
• Spout capacity over 40 litres per minute (at 1 bar).
• Length for all standard installation depths (for wall thicknesses 150 – 415 mm for surface mounting)

KEMPER FROSTI-PLUS
The kit for the final installation allows the fitting to be installed in the raw construction phase. The spout housing is mounted after the outer wall is completed. The frost-proof outdoor fitting Frosti Plus figure 574 is also available in combination with the KEMPER KHS floor box figure 640 50 as a KEMPER Frosti hygiene set figure 640 60.
The advantages of Frosti-Plus
Due to complete automatic emptying after each shut-off process, there is no stagnation in the fitting, i.e. no contamination. Tap with above-average outlet capacity of over 40 litres per minute (at 1 bar), so that even with long water hose still pressure is applied. One length for all standard installation depths (for wall thicknesses 150 – 415 mm for surface-mounted installation), DN 15 including hose coupling for standard plug-in systems, surface-mounted parts matt chrome-plated. Made according to every made possible Hygienically safe: no stagnation volume, no heating water basically factory equipped with mandatory safety combination.
(Tube/hose aerator is loss-proof and backflow preventer) according to DIN/DVGW sound insulation tested according to DIN EN ISO 3822 with only 2 revolutions fully opened or closed according to test standard VP 648 DVGW certified, sound insulation class quick and easy installation.

How it works:
With just 2 turns, the KEMPER FROSTI is fully open. The spout housing is flowed through. Thanks to the low-flow design of the fitting, an above-average outlet capacity of over 40 litres per minute (at 1 bar flow pressure) is achieved. So that there is still sufficient supply even with a long water hose. Fully automatic emptying