KPH-1500Classic – Kitchen Plinth heater – Central Heating – Hydronic – 1.5kW

KPH-1500Classic – Kitchen Plinth heater – Central Heating – Hydronic – 1.5kW (Black) [Energy Class A++]

Power supply 230V-50Hz       Pipe connection size: 15mm 
Electrical Connection via 3A fused spur
Heat output of 1260 watts @ Normal speed and 1450 watts @ Boost speed. (Based on entering water temperature of 70°C)
Max. Operating pressure : 6bar

How It Works  Kitchen plinth heater connecting directly into the central heating system and generally installed behind the plinth under a unit or cupboard. The heater automatically switches on/off whenever the central heating system turn on. Build-in thermostat doesn’t allow the fan to blow the cold air until the water temperature in the central heating system reaches above 38°C. Once the unit turns on the heat is blown through a heat exchanger into the room. There is no need to switch this unit on and off manually. If you need more heat all you do is switch the fan to boost which will push more hot air into the room. This kitchen plinth heater is a very easy to install and use.  Included in the Packing  Heater unit with two speed switch White Grille (fixed to the unit) – Made out of 0.9mm steel for extra strength 2X Grille fixing Screws Pair of 15mm compression flexible hose (900mm long) – WRAS approved. Instruction manual Technical Details  Power supply 230V-50Hz Electrical Connection via 3A fused spur  Heat output of 1260 watts @ Normal speed and 1450 watts @ Boost speed. (Based on entering water temperature of 70°C).  Max. Operating pressure : 6bar  Pipe connection size: 15mm  Warranty is 2 year parts, repair or replace the product if it is found to be defective in material or workmanship. (This warranty does not apply to damage resulting from abuse or unreasonable use or supplemental damage caused by incorrect installations).  Running Costs can be Approx. 10 pence per week(based on 5 hours of running per day) Product weight 4.5kg  Product dimensions: 500mm x 290mm x 105mm (LxDXH) Minimum clearance of 20mm between top of product and underside of shelving required