Reboot MIG Welder MIG160 230V IGBT Inverter 1kg/5kg Gas/gasless/MIG/MMA/Lift TIG
Reboot MIG Welder MIG160 230V IGBT Inverter 1kg/5kg Gas/gasless/MIG/MMA/Lift TIG 4 in 1 Inverter Flux cored Wire/Solid Wire MIG Welding Machine MMA MAG ARC
- 【RMB1600】Support 1kg and 5kg of the flux cored wire and solid wire, support welding with gas and without gas
- 【IGBT welding】Use welding wire 0.8/1.0mm to weld over 1.0mm thick workpieces
- 【4 in 1 function】MIG Gas/MIG gasless/MMA/LIFT TIG welding, suitable for electrodes rod from 1.6 to 3.2 mm, rod welding (3.2 mm rod) 7018 very good, also 6013 and 7018. Rated duty cycle: 60% at 160 A and 100% at 108A.(note: this project does not include TIG torch)
- 【Multipurpose】welding stainless steel, mild steel, other metal material. For home use, the switching frequency is outside the audio range, which virtually eliminates noise pollution. Perfect for beginners and advanced welders!
- 【Warranty】3 year warranty (note: this item does not contain a plug, you need to configure it separately. 16A-32A is recommended, circuit breaker requires above 30A)
| SKU: | B098DL6X64 |
| Weight: | 12.4 kg |
| Size: | MIG160 |
| Dimensions: | 53.9 x 35.5 x 32.2 cm; 12.41 Kilograms |
| Colour: | Black |
| Batteries Required: | No |
| Manufacture: | Reboot-EU |
| Size: | MIG160 |
Product Description
MMA/ARC
Troubleshooting
Why can't my MIG160 Welder be welded correctly?
1. Wire feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly?
2. Wire choice: Are you using 0.035” wire? We recommend 0.030-0.035″ for best performance.
3. The length of the welding wire: Is your welding wire of welding torch mouth out too long? Your welding wire out should be no more than ½”.
4. Pull the trigger: To begin welding, pull the trigger on the MIG gun.
5. Proper grounding: The ground clamp should not be attached to painted or coated metal.
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Input voltage | 230V | 230V | 150A | 0.8mm | 32 PCS | 42 PCS |
| Current area | 40-130A | 40-135A | ||||
| Function | MIG GAS/MIG NO GAS/ARC/Lift TIG | MIG gasless | ||||
| Welding thickness | ≥0.8mm | 0.5 mm-5mm | ||||
| Degree of utilization | 60% | 60% | ||||
| Package weight | 8.8KG | 5.4KG | ||||
| Welding materials | Stainless steel/carbon steel/low carbon steel/other metal materials | Stainless steel/carbon steel/low carbon steel/other metal materials | ||||
| Welding wire diameter | 0.8mm/1.0mm | 0.8mm/0.9mm | ||||
| Welding wire specifications | 1KG | 1KG |
About MIG gas:
- Connect the ground cable terminal to the negative terminal and connect the polarity conversion connector to the positive terminal.
About MIG without gas:
- Connect the ground cable terminal to the positive terminal, and connect the polarity conversion connector to the negative terminal, just use the flux cored wire, do not the Cylinder.
About Lift Tig:
- The ground cable terminal is connected to the positive terminal, the TIG torch is connected to the negative terminal, and the polarity conversion connector does not need to be connected. The Tig gun 2-pin cable does not need to be connected, and the blue wire is connected to the gas cylinder (the 2-pin wire is used for high-frequency arc start of the TIG machine). LIFT TIG uses argon gas, must prepare the gas bottle yourself.
About MMA:
- The ground wire terminal is connected to the negative terminal, the welding torch terminal is connected to the positive terminal and the polarity conversion connector does not need to be connected.
- For the electrode size it is 1.6-3.2mm, suitable for materials E6017, E7018
Welding wire:
- 0.8mm flux cored wire is included in the package. The machine is suitable for 0.8/0.9/1.0mm, 1 kg solid wire and flux cored wire. The solid wire must be bought yourself. The flux cored wire comes with a roll of 0.8mm (1 kg).
Wire feed wheels:
- the package comes with two wire feed wheels.
- One side of the wire feed wheel is 0.8mm, one side is 1.0mm. 0.8mm side can use 0.8mm welding wire, 1.0mm side can use 0.9mm and 1.0mm welding wire, V-type is used for solid wire welding, knurled wheels Used for flux cored welding.
Inductance adjustment:(V)
- Inductance adjustment: If the splash is too large or the welding pool is not deep enough, it can be adjusted to a larger value, otherwise it can be smaller.
About the welding material:
- The welding can weld stainless steel, carbon steel, low carbon steel and other metal materials, can be widely used in automobiles, piping technology, repair and maintenance, metalworking, manufacturing, field work, etc., and can also be used in home workshops and hobbies. Welding thickness over 0.8mm. Very suitable for beginners, enthusiasts and professionals, simple and easy to use.
About the speed of the feed wire:
- You can through adjust the current to control the speed of the feed wire, the machine is a intelligent machine can automatically match the wire feeding speed and current.
About welding torch accessories:
- We also provide wear parts for welding torches, MB15 torch, LIFT TIG torch and plasma cutting gun, just visit our store to buy.
- Our machine can support the generator which requires above 5000W
Advantages of our products after upgrading:
- Pure copper core wire-stable current output, low long-distance transmission loss. Compared with ordinary welding machines, saves more electricity and efficiency.
- Digital chip control, stable-arc starting immediately. Built-in ultra-low voltage smart regulator. The arc force overload protection and powerful heat dissipation function also make the welding machine work stably during long-term work.
- Safety-arc force overload protection, overvoltage protection, undervoltage protection, overcurrent protection, overload protection, fan cooling.