Ebike Battery 24V 10AH for 150-250W Motor, Electric Bicycle Battery with Discharge Plug, Safety Lock, ON/OFF Switch and Charge

 .
• .
• ✅ Basic parameters: Size: 390*110*75mm. 24V 10AH, for 200-350W motor. 2pin output port (The negative pole is on the same side of the keys and the positive pole is on the other side).
• ✅ Intelligent Multiple Protection: Connect the positive (+) terminal to the red wire and the negative (-) terminal to the black wire.🌈Our batteries have passed CE, ROHS and MSDS safety certification to ensure users’ safety in extreme usage scenarios to guarantee. For electric mountain bikes, fat tire electric bikes, snow beach electric bikes and more.
• ✅ Safe Lock & LED Battery Level Light: The aluminum alloy bike battery case. 🌈The bike battery has an ON/OFF switch, a portable handle, a power indicator and a key lock. 🌈3 LED power indicators, each representing 33% power.
• ✅ ≥80% Capacity After 800 Cycles: Comes with a powerful 2A battery charger, and it takes about 5-7 hours to fully charge. Ideal mileage (km): AH value*3 (However, will be affected by factors such as load, road condition, driving speed, battery consumption and driving habits.) This battery charging cycle exceeds 1000 times, life expectancy of up to 5 years.
• ✅ FAST DELIVERY: Dispatched from our UK warehouse. 2-5 days fast delivery.

Specification:
Rated Voltage/Capacity/Weight (Optional): 24V 10AH, 3.4kg ;
Size: (L*W*H) 390*110*75mm, 15.4*4.35*2.95 inch
Discharging method: bottom discharge
outlet connector: 2pins
Body material: ABS + aluminum alloy
Battery type: lithium-ion
Certification: CE,RoHS,MSDS
Impedance: ≤150mΩ
Discharge cycle life:>1000 times

Working temperature:
Charging: 0°C~45°C
Discharge: -20°C~60°C
Storage: 0°C~30°C

Scope of delivery:
1 x battery with aluminum case (bottom discharge),
1 x charger 2A,
1 X mounting plate,
1 x discharge plug,
2 x keys,
1 x User Manual.

PCB Protection: Overcharge, Overdischarge, Overload and Short Circuit.
BMS Board Protection: BMS is used to monitor the battery by measuring voltage, temperature, current and SOC (state of charge). BMS can balance energy between batteries to make them more identical and lengthen their discharge cycle.

Instructions:
1. Charge the battery after receiving it, it is recommended to turn on the power switch during charging, 🔋use the correct lithium battery charger.
2. Connect the positive (+) terminal to the red wire and the negative (-) terminal to the black wire.
3. Avoid charging under the sun, away from the high temperature heat source.
4. Metal objects should not fall into the battery interface to avoid short circuits.
5. Do not disassemble or modify the battery
6.When the battery is not in use, it should be fully charged and stored in a dry and cool place, and a full charge every 2 months.