ElecLab Raspberry Pi Touchscreen Monitor 7 Inch HDMI Capacitive LCD Display 1024×600 RS232/RS485 Speaker Bracket for Raspberry Pi 4B 3B+ 3B 3A+ 2B B+ …

 .
• .
• This 7 inch HDMI display is have 1024×600 resolution with 5 point capacitive touch screen. suitable for Raspberry PI, and the Raspberry Pi can be easily installed on the back of the display through the 4 positioning holes .Integrated audio amplifier and 2x3W speakers.
• On-board CH340E chip with selectable RS232 or RS485 functions via a DIP switch, DB9 interface. TXD/RXD signal has LED indicator to show the communication transceiver process. Can connect with PLC, step/servo driver, LORA module.
• One AV signal input socket can be connected to an external analog camera, and 3 PH1.5 analog signal input sockets can be connected to a mini analog camera.
• One SSD module mounting position can install ElecLab NGFF 2242 SSD For USB 3.0 module or others.
• One minipcie socket can install SIM7600 series 4G module or low cost SIM868 2G module.

Features and Specs

The 7″ LCD display is an IPS LCD display which connects to the Raspberry Pi through the HDMI FPC cable.

The Physical resolution of LCD display is 1024*600.

It has 5 point capacitive touchscreen and connects to RPI1,2,3 via PI3 USB board or to RPI4 via PI4 USB board.

It has 2x3W speakers.

It has a rs232/rs485 interface.

It has a minipcie socket for SIM7600 4G module or SIM868 2G Module.

It has a NGFF 2242 SSD USB3.0 module for Pi 4 installation location

It is compatible with Raspberry PI 1 model A+ B+/ PI 2 model B/PI 3 model A+ B B+/PI 4 model B nd 2B.

It is powered by the USB TypeC socket and the Raspberry Pi is powered by the display. Connect RPI1,2,3 with micro usb board, and connect RPI4 with USB Typec board.

It doesn’t need install driver.

Package Includes

1 x 7 inch hdmi display

1 x TypeC USB cable

4 x pcb(micro usb power board, typeC usb power board, usb board for RPI3, usb board for RPI4)

1 x XH2.54 2Pin cable

1 x touch pen

4 x M2.5×5 screw

4 x M2.5×10 screw

1 x HDMI FPC cable for RPI1,2,3

1 x Micro HDMI FPC cable for RPI4

1 x straight screwdriver

2 x stand

1 x user manual

How to set when Bullesys is not showing

When use Bullseye, make sure that VC4-KMS-V3D is prohibited in config.txt

#dtoverlay = VC4-KMS-V3D