Hawke Tilt Bipod 9-13″ with Leve

 .
• .
• TILTING BIPOD CAN BE LEVELLED FOR USE ON UNEVEN GROUND. Ideal to improve the stability of your rifle for more accurate shots.
• SPRING LOADED LEGS EASILY ADJUST IN HEIGHT from 9″ to 13″ (23-33cm). Simply press the release button to raise or lower legs. Spring loading makes the legs easier to open.
• EASY TO ATTACH AND ADJUST – Stud clamps fit over the swivel stud on the forearm of the stock. Sling can be attached directly to the bipod using a sling swivel. Lever can be used instead of locking nut for quick adjustments.
• PRECISION ENGINEERED from high grade aluminium for lightness and strength, and anodized in matte black to cut down glare and reflections.
• HAWKE ONE YEAR WORLDWIDE WARRANTY – Genuine product from the brand leader in high performance riflescopes and binoculars.

ATTACHING THE BIPOD
Your rifle must have a swivel stud attached to the forearm of the stock. Unscrew the tightening screw to allow the stud clamps enough movement to fit through the square hole and over the swivel stud. When the clamp is in position, tighten the screw. Ensure the bipod is straight prior to finally tightening the bipod clamp securely on your rifle. Slings can then be attached directly to the bipod using a sling swivel.

EXTENDING THE LEGS
The bipod legs can be adjusted to suit different shooting positions; they are spring loaded to assist in opening. Each leg is also notched for specific heights. To extend the legs, simply press the release button. To retract the legs, press and hold the release button while pushing the legs back.

TILT
The bipod can be levelled for use on uneven ground. Simply loosen the locking nut or lever and adjust until the rifle is level. To lock back into position, tighten the locking nut or lever.

SUPPLIED LEVER
The lever allows for quick adjustment and can be installed instead of the knurled locking nut on the front end of the bipod. To operate correctly, the cylindrical spacer should be installed with the deeper section first, and then attach the lever. The lever can be moved to the desired position using the ratchet feature. Simply pull the lever away from the bipod and rotate into desired position.

FEATURES
Height adjustable spring loaded legs
Easily attaches to a swivel stud
Works with a sling attached
Lightweight high grade alloy with black anodising
Thick rubber stock pads to prevent damage to wooden stocks
Designed to help improve accuracy and stability
Spring loaded adjustable legs: 9-13″ / 23-33cm
12.2oz / 345g