Power Probe 319FTC-RED Test Light and Voltmete
Power Probe 319FTC-RED Test Light and Voltmete
- Provides power and earth for functionalities
- Digital Voltmeter with detection of at least./Max. Voltage values
- Banana Jack, 4 mm
- 6 metre power cable
- Tests for use in low Earth/Short circuits
Power Probe 3 with carry case, cigarette lighter charger and 6 metres extra cable.
The Power Probe 3 contains 2 6 metre long cables that connect to the vehicle battery, allowing the user to perform electrical tests inside or outside the vehicle, even on trucks or trailers. In total, the 2 cables are 12 metres long.
The Power ProbeIII contains a continuity test digital multimeter, with acoustic signals and 2 LEDs (+ and -) on your work device. This electric circuit tester also supplies battery voltage or earth to activate components of your vehicle. It is a very powerful tool and saves a lot of time on all work on your vehicle.
Features:
Voltage test and polarity detection. Continuity tester. Activates components inside and outside of your vehicle. Checked for bad reasons. Red (+), green (-) LED display and acoustic display. Protection by 8 amp fuse 12-24 V. Backlit LCD display. Includes work light. Multiple readings on the same screen. Robust housing.
Advanced functions:
Activates components by power supply or mass.Possibility to test components such as incandescent lamps, fuses and motors. The best way to test your components. | Check the lighting and connections of your trailer.Easy way to attach voltage to the circuit of your trailer or trailer. No need to connect to the vehicle for testing. | Activate components in your vehicle.Includes a short circuit protection to avoid damage. Another easy way to safely check the components of your vehicle. |
Checks for good and poor grounding.When the green "-" LED lights up, this indicates a good mass. When the red "+" LED lights up, it indicates poor grounding. | Checks and locates short circuits.You can trace back from the fuse box to the faulty luminous circuit. Helps detect and locate broken wires. | 10Ω continuity testThe display and by activating the green "+" LED is displayed when it is over 650Ω. An easy way to check the resistance in plugs, cables, etc. . |
Power Probe 3 PP319FTCRED includes:
Power Probe 3 in red cable with clamps for connecting to the battery of 6 metres and extra cable of 6 metres. Total 12 m cable. Cigarette lighter charger adapter 3 inches (7.6 cm) probe tip. Carry bag.
Red | Carbon | Blue | Green | Red | Carbon |
Yes, 1 x 6 metres | Yes, 1 x 6 metres | Yes, 1 x 6 metres | Yes, 1 x 6 metres | Yes, 2 x 6 m. (12m in total) | Yes, 2 x 6 m. (12m in total) |
✓ | ✓ | ||||
✓ | ✓ |
✓ | ✓ | ✓ |
Complete cable set | ECT3000 cable break tester and accessories | Multi-meter and accessories |
12 – 24 VCD | 12 – 24 VCD | 12 – 24 VCD | 12 – 24 VCD |
1 line | In colour, different lines | In colour, different lines | In colour, different lines |
0 – 70 VCD | 0 – 70 VCD | 0 – 200 VCD | 0 – 200 VCD |
✓ | ✓ | Average value, MIN MAX simultaneously | Average value, MIN MAX simultaneously |
No | No | Peak value to peak value / TRMS / average | Peak value to peak value / TRMS / average |
No | No | 0 – 10 K OHM | 0 – 10 K OHM |
No | No | ✓ | ✓ |
No | No | ✓ | ✓ |
No | No | ✓ | ✓ |
No | No | ✓ | ✓ |
SKU: | B005MVB3S0 |
Weight: | 953 g |
Dimensions: | 19.05 x 10.16 x 26.04 cm; 952.54 Grams |
Brand: | Powerprobe |
Model: | PP319FTCRED |
Manufacture: | Power Probe |
Product Description
Power Probe 3 with carry case, cigarette lighter charger and 6 metres extra cable.
Power Probe 3 PP319FTCRED includes:
Power Probe 3 in red cable with clamps for connecting to the battery of 6 metres and extra cable of 6 metres. Total 12 m cable. Cigarette lighter charger adapter 3 inches (7.6 cm) probe tip. Carry bag.
Power Probe 3 | ✓ | ✓ | ✓ |
---|---|---|---|
Accessories | Complete cable set | ECT3000 cable break tester and accessories | Multi-meter and accessories |