Einhell TE-CD 12/1 Li Cordless Drill Driver With 2 x Batteries and Charger | 30
Einhell TE-CD 12/1 Li Cordless Drill Driver With 2 x Batteries and Charger | 30 Nm, 2-Speed Gearing, 10mm Drill Chuck, LED Light | Combi Drill Set With 5 Piece Drill Bit Se
- The Einhell cordless drill is a powerful and robust helper for screwdriving and drilling jobs in the home, workshop and garage. The cordless drill driver reaches a maximum torque of 30 Nm.
- The advanced lithium-ion technology means the drill is always ready for use – without any self-discharging whatsoever. The robust metal gearing was developed with maximum durability in mind.
- The two-speed gearing provides the drill with power and dynamic performance, while the electronic speed control with 20 torque settings ensures that the tool can be adjusted to the particular material and application in every situation.
- For optimum illumination of dark work areas the cordless drill is equipped with LED lighting. The single-sleeve drill chuck has a diameter of 10 mm.
- With the ergonomic design and proven softgrip, exceptionally easy handling has been given a high priority.
- The charger has the 2.0 Ah battery charged up and ready for use in 45 minutes and is also included with the accessories. The set is supplied in a practical storage box with magnetic fastener.
| SKU: | B07GSD5XP8 |
| Weight: | 1.13 kg |
| Dimensions: | 31.7 x 7.9 x 23.8 cm; 1.13 Kilograms |
| Model: | 4513594 |
| Part: | 4513594 |
| Colour: | Red, Black |
| Pack Quantity: | 9 |
| Batteries Required: | Yes |
| Batteries Included: | Lithium Ion |
| Manufacture: | Einhell |
| Quantity: | 9 |
From the manufacturer
Optimal lightingLED lighting for optimum operation in dark areas.
” data-position=”triggerHorizontal” />Maximum torque of 30 NmHigh performance for tough jobs with a maximum torque of 30 Nm.
” data-position=”triggerHorizontal” /> TE-CD 12/1 Li (2×2,0Ah)Products in comparison
12 V|2 Ah|Li-Ion | Battery | 12 V|1.3 Ah|Li-Ion |
0-400 min^-1 | Idle speed (gear 1) | 0-350 min^-1 |
0-1400 min^-1 | Idle speed (gear 2) | 0-1300 min^-1 |
30 Nm | Max. torque hard | 24 Nm |
20 settings | Torque steps | 20 settings |
10 mm|single sleeve | Drill chuck | 10 mm|single sleeve |
Power X-Change |
12 V|2 Ah|Li-Ion | Battery | 18 V|Li-Ion |
0-400 min^-1 | Idle speed (gear 1) | 0-320 min^-1 |
0-1400 min^-1 | Idle speed (gear 2) | 0-1350 min^-1 |
30 Nm | Max. torque hard | 48 Nm |
20 settings | Torque steps | 24 settings |
10 mm|single sleeve | Drill chuck | 10 mm|single sleeve |
Power X-Change |
12 V|2 Ah|Li-Ion | Battery | 18 V|1.5 Ah|Li-Ion |
0-400 min^-1 | Idle speed (gear 1) | 0-350 min^-1 |
0-1400 min^-1 | Idle speed (gear 2) | 0-1250 min^-1 |
30 Nm | Max. torque hard | 44 Nm |
20 settings | Torque steps | 20 settings |
10 mm|single sleeve | Drill chuck | 13 mm|single sleeve |
Power X-Change |
12 V|2 Ah|Li-Ion | Battery | 18 V|1.5 Ah|Li-Ion |
0-400 min^-1 | Idle speed (gear 1) | 0-550 min^-1 |
0-1400 min^-1 | Idle speed (gear 2) | – |
30 Nm | Max. torque hard | 35 Nm |
20 settings | Torque steps | 21 settings |
10 mm|single sleeve | Drill chuck | 10 mm|double sleeve |
Power X-Change |
- TH-CD 12-2 – Kit
- TE-CD 18 Li-Solo
- TE-CD 18/2 Li-i – Kit
- TE-CD 18/35 Li – Kit
Planer TE-PL 900
The Einhell planer TE-PL 900 is a powerful hand-held planer for applications with a chip depth up to 3 millimeters. A large blade shaft and 900 W power deliver optimum planing results.
Sliding Mitre Saw TC-SM 2534/1 Dual
The TC-SM 2534/1 Dual Sliding Mitre Saw is ideally equipped for a wide range of jobs. The carbide saw blade cuts through wide workpieces thanks to its smooth and stable drag function.
All-purpose saw TE-AP 1050 E
The TE-AP 1050 E all-purpose saw is a high-quality tool for experts, which performs a wide spectrum of sawing jobs and really comes into its own when rapid sawing progress is required.
Hammer drill TE-ID 750/1 E
The TE-ID 750/1 E hammer drill is a versatile tool which provides very good service to DIY enthusiasts on screwdriving, drilling and hammer drilling jobs everywhere in the home, workshop and garage.
Compressor TC-AC 190/24/8
The TC-AC 190/24/8 is a versatile compressor, which is doing a good job at a lot of works with compressed air due to its compact measures and 8 bar working pressure.
Demolition hammer TC-DH 43
The Einhell demolition hammer TC-DH 43 delivers high-power impact with an impact power of 43 J.