Fluke T90 Voltage & Continuity Tester, Yellow
Fluke T90 Voltage & Continuity Tester, Yellow
- An essential part of any electrician’s selection of tools, the Fluke T90 contains all of the functionality you need for accurate and reliable two-pole voltage and continuity testing.
- Ideal for use in any low voltage electrical outlet, the T90 can be used to measure voltage across a range of 12V to 690V and continuity from 0 to 400kΩ with audible indication.
- LED indicators show detected AC/DC voltage presence, Low battery indicator, Detects voltage even when the batteries are discharged.
- Improved probe docking system ensures that probes are protected when stored, Push on probe tips reduce metal exposure from 19mm to 4mm, WearGuard indicator shows damage to test leads.
| SKU: | B00CSRYG8A |
| Weight: | 340 g |
| Dimensions: | 23 x 6.5 x 3.8 cm; 340 Grams |
| Model: | FLUKE-T90 |
| Part: | FLUKE-T90 |
| Colour: | Yellow |
| Pack Quantity: | 1 |
| Batteries Required: | Yes |
| Batteries Included: | Alkaline |
| Manufacture: | Fluke |
| Quantity: | 1 |
From the manufacturer
Fluke Two-pole Voltage and Continuity Testers
Designed according to both regulation HSE GS 38 (tip caps) and IEC EN 61243-3:2014 to verify the absence of voltage – even with discharged batteries.
CAT IV 600 V, CAT III 690 V safety rating
With 4 ways to indicate the presence of voltage – LED indicator, LCD display, audible tone or tactile feedback, always know if hazardous voltage is present (digital display on T130, T150, vibration indicator on T110, T130, T150)
Fluke T90 Basic Voltage and Continuity Tester
The compact Fluke T90 Voltage and Continuity Tester gives you fast test results the way you need them in a slim design. Large, easy-to-use buttons, bright backlit LED indicators and clear audible indicator give quick results in any work situation.
Fluke’s two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.
- Dual insulated cable tested to 3x the required bend angle provides increased reliability and durability.
- Switchable load: avoid display of ghost voltages allowing you to draw more current from the circuit under test and avoid trip residual-current devices (RCDs)
- Backlit graduated scale and backlit indicators
- Improved probe docking for secure storage.
- Single-pole phase test offers fast identification of live conductors.
- Push-on probe tips, probe tip protector and storage accessory.
- Tip protector serves as an extra hand when opening UK electrical safety outlets.
- Low battery indicator.
 |  |  |  | |
|---|---|---|---|---|
| Voltage AC/DC | 12V – 690V | 12V – 690V | 6V – 690V | 6V – 690V |
| Continuity | 0 – 400 kΩ | 0 – 400 kΩ | 0 – 400 kΩ | 0 – 400 kΩ |
| Frequency | 0 / 40 – 400 Hz | 0 / 40 – 400 Hz | 0 / 40 – 400 Hz | |
| Phase rotation | 100 V – 690 V | 100 V – 690 V | 100 V – 690 V | |
| Resistance measurement | Up to 1999 Ω | |||
| Response Time (LED indicator) | < 0.5 s | < 0.5 s | < 0.5 s | < 0.5 s |
| 200 kΩ input impedance | Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V | Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V | Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V | Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
| 7k Ω input impedance (with load buttons pressed) | Current draw 30 mA @ 230 V | Current draw 30 mA @ 230 V | Current draw 30 mA @ 230 V | |
| Safety rating | CAT II 690V CAT III 600V | CAT II 690V CAT III 600V | CAT II 690V CAT III 600V | CAT II 690V CAT III 600V |