Steinel Outdoor Wall Light L 20 – Stainless-Steel Trim, Wall Lamp, 180&deg

Steinel Outdoor Wall Light L 20 – Stainless-Steel Trim, Wall Lamp, 180° Motion Detector, Twilight Sensor, 10 m Range, Shockproof, E27

<ul>
<li>The angle of coverage of the motion detector is 180° with a max. reach of up to 10 m</li>
<li>The sensor lens tilts through an angle of 90° for precision-adjusting the angle of coverage</li>
<li>Sensor and light diffuser are made of impact-resistant polycarbonate (IK 07)</li>
<li>The translucent chassis rear side casts a wonderfully attractive ambience light onto the building wall the SensorLight is mounted on</li>
<li>The E27 lampholder takes conventional incandescent lamps up to 60 W max. as well as low-energy lamps or LED lamps up to 20 W (not included)</li>
<li>Time and twilight threshold are set by control dials that are easily accessed underneath the sensor</li>

<li>The L 20 lighting is wired up easily and quickly and fits perfektly at entrances and building fronts</li>
</ul>

Check Offer Price

SKU:	B0065HLR5Y
Dimensions:	23 x 8.5 x 25 cm; 700 Grams
Model:	566814
Part:	566814
Batteries Included:	1 Unknown batteries required.
Manufacture:	Steinel Vertriebs GmbH

Check Offer Price

From the manufacturer

The pyro sensor

This electric module reacts as soon as the infrared thermal radiation within the detection zone changes. This causes a voltage jump which is then converted into an electronic impulse, which switches the light on or off.

Human thermal radiation

Due to their body heat humans emit infrared radiation. Infrared sensor technology uses this radiation to detect movement and to react accordingly.

Reach

The reach of infrared sensors depends on the direction of movement. With tangential movements (parallel to the sensor) the reach is about 10 m on average, which is shortened when moving directly towards the sensor (radial movement). To attain the maximum reach the optimal mounting height of 2 m should be given.

Hightech material

Apart from the UV-resistant plastic, which assures an attractive appearance even after years of use, Magnesium Composite is used for the LED cooling system. This material from the aviation and aerospace sector, is employed here in serial manufacturing for the first time.



Type of sensor	Passive infrared	Passive infrared	Passive infrared	Passive infrared
Output	Max. 60 W / E27	Max. 60 W / E27	Max. 60 W / E27	9.3 W / LED-lighting system
Angle of coverage	180°	180°	180°	180°
Segmental detection suppression possible	✓	✓	✓	✓
Material	Aluminium, UV-resistant plastic	Stainless steel, UV-resistant plastic	Stainless steel, UV-resistant plastic	Stainless steel, UV-resistant plastic
Reach	Max. 10 m	Max. 10 m	Max. 10 m	Max. 10 m
Twilight setting	2 – 2.000 lx	2 – 2.000 lx	2 – 2.000 lx	2 – 2.000 lx
Time setting	8 sec. – 35 min.	8 sec. – 35 min.	8 sec. – 35 min.	8 sec. – 35 min.
Protection type	IP 44	IP 44	IP 44	IP 44
Impact-resistant	✓	✓	✓	✓



Application	Driveway, garden, path	Entrance, Yard, Parking place	House entrance	House wall, entrance area, facade, garden, terrace	Soldering of pipes, plastic welding, removal of foils etc.	Building models, tinkering, gluing picture frames, repairing figures etc.
Special features	Invisible iHF sensor, soft light start, 160° detection, 5 m range, networkable via Bluetooth, settings via free app	Infrared sensor, LED panel rotates and swivels 180°, 180° angle of coverage, luminous flux of 1550 lm, motion detector, time setting from 8 sec. to 35 min.	Solar-powered lighting, 2 lx twilight setting, incl. self-adhesive numbers	Invisible iHF sensor, up/downlight, 160° viewing angle, luminous flux of 679 lm, motion detector, time setting from 5 sec. to 15 min	Electronic temperature control, residual heat indicator, ceramic heating element, temperature setting with joystick, LCD display	Warm-up time from 3 to 5 minutes, interchangeable attachments, wireless, including Ø11 mm glue sticks and charging station