Autoglym Polar Blast, 2.5L – Thick Snow Foam Pre-Wash pH Neutral Car Cleane
Autoglym Polar Blast, 2.5L – Thick Snow Foam Pre-Wash pH Neutral Car Cleane
- Rich snow foam car pre wash with superior cling
- Apply through a pressure washer or foam gun. Ideal for use with Autoglym Polar Blaster
- Loosens dirt and contamination from paintwork before contact washing to reduce the risk of scratches & swirls
- For best results, follow up with Autoglym Polar Wash and Autoglym Polar Seal. Approximately 25 washes when using 100ml product to 500ml water.
- pH neutral formulation, will not remove any previously applied layers of wax or polish. Not suitable for soft top convertibles
Polar Blast is a snow foam that can be applied using a pressure washer or foam gun as a pre-wash stage. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling prior to shampooing. This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination. Its pH neutral formulation will not remove any existing layers of polish or wax.
| SKU: | B079QNQL1R |
| Weight: | 2.49 Kilograms |
| Brand: | Autoglym |
| Origin: | United Kingdom |
| Volume: | 2500 Millilitres |
From the manufacturer
Step 1 – Polar Blast Snow Foam
Apply Polar Blast snow foam with your pressure wash and foam cannon for best results. Spray on the exterior bodywork of your vehicle and leave for up to 10 minutes.
This removes the top layer of dirt before you wash that reduces the chance of swirl marks caused by sponge/wash mitt agitation.
Step 2 – Polar Wash Snow Foam
Apply Polar Wash snow foam with your pressure wash and foam cannon for best results. Spray on the exterior bodywork of your vehicle and agitate the thick foam with a sponge or wash mitt.
Never “miss a bit” again as you will see where you have agitated the foam. Rinse off ready for step 3…
Step 3 – Polar Seal Snow Foam
While the car is still wet apply Polar Seal snow foam with your pressure wash and foam cannon for best results.
Leave on the bodywork for no more than 3 minutes and avoid the windscreen.
Rinse off with water and watch how it flows off instantly due to Polar Seal’s excellent hydrophobic properties.
Drying time is dramatically reduced and leaves you an perfect wax-like finish…
Result
Once the car is dry you will be the envy of all your friends with the ultimate finish and protection…
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Suitable for all cars | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Pressure washer required | ✓ | ✓ | ✓ | ✓ | ✓ | X |
| Scented | X | ✓ | ✓ | ✓ | ✓ | X |