Car Battery Tester 6V 12V,KINGBOLEN BM560 100-2000 CCA Auto Battery Tester,Automotive Battery Analyzer for Cars Trucks SUV ATV Boats Motorcycles Vehicle.

• 【2024 New Car Battery Tester Suitable for 6V/12V Batteries】 The KINGBOLEN BM560 car battery tester checks and reports the health status of all 6V and 12V batteries, including general batteries, AGM flat batteries, AGM spiral batteries, GEL batteries, EFB batteries, etc. Accurate test results are available in seconds.
• 【Test Functions- Battery Test, Start Test, Charge & Load Test】 Jude the battery health condition through test data. ①Test the battery by determining the exact CCA parameter of the battery and set the benchmark accordingly; ②Test the voltage and time required to start the motor in the flame state; ③Start the car engine and test the battery voltage status in the charging state; ④Start the car engine, switch on all load devices to test the voltage situation in the working state.
• 【Work On 5 Battery Types To Test Various Battery Parameters】 KINGBOLEN BM560 automotive battery tester can compatible with EFB, GEL, AGM spiral, AGM flat plate and regular flooded battery. it can cold cranking ampere (CCA), batteries State of Charge (SOC), State of Health (SOH), voltage waveform, enables screen recording, real-time voltage monitoring, recording and playback etc. It can clearly indicates if the battery needs to be replaced.
• 【Tests A Wide Range Of 6V And 12V Batteries】 KINGBOLEN BM560 car battery tester tests a wide range of 6V and 12V batteries with a capacity of 100 to 2000 CCA or 2AH to 200AH. For smaller motorbike, ATV, boat and other batteries, there is a 2AH ultra-low capacity detection mode that allows these lower capacity batteries to be accurately tested and reported on. Most other battery testers do not have this capacity.
• 【Protection Against Reverse Connection】 KINGBOLEN BM560 car battery tester is protected by reverse polarity. If you accidentally connect the two wires upside down, do not worry, the battery tester will not work at this time to prevent the internal circuit from burning, which can also protect the long-term use of the device and the safety of the operator.
• 【Warm tips】1. The motor must be switched off for testing. 2.this device does not need built-in battery. 3.If you have any questions during the testing process, please contact us, our engineer will help you within 24 hours.

---

Product Description

Big Buttons And Screenshot Function

Big Buttons:

KINGBOLEN BM560 has 4 large buttons: scroll buttons for up and down selection, an “OK” confirmation button and a button for returning to the higher-level menu, easy to operate.

Screenshot Function:

Hold up and down buttons together to take a screenshot of the test results.It can save up to 10 screenshots; if more than 10, you can connect the battery tester to the computer and then copy the image to the computer, it's very convenient and practical.

How Do I Print The Data Report?

1. Before you can use the function for printing data, you must connect the device to a computer using the USB cable. Then insert the CD into the computer.
2. Install the USB driver.
3. Open the printing software and select the COM port NO.
4. select the Print data function to start printing.

Supports Multiple Languages

The test results of the KINGBOLEN BM560 are based on JIS, EN, GB, CA, DIN, SAE, BCI, MCA and IEC standards and support multiple languages: English, Russian, Spanish, French, Italian, German, Portuguese, Polish, Japanese, Chinese and Traditional Chinese.