Car Radio Aerial DAB GPS FM, Universal Car Antenna Active 12V Car Radio Top Roof Mount Antenna Replaceme

• Scope of Adaptation: The vehicle‑mounted digital DAB+GPS+FM radio antenna is suitable for most models on the market and has a beautiful shape. Please confirm whether the product is suitable before purchasing！
• Signal Enhancement： The parallel power carrier is used to supply power to the output 30CM power indicator. This kind of parallel input power carrier scheme can greatly improve signal reception and transmission.
• Specification: Bandwidth: ≥10 (±0.5), Standing Ratio: ≤1.5 (±0.5), Gain: 15dB (±3), Amplifier Gain: 15dB (±2), Working Voltage: 12V, Characteristic Impedance: 75Ω, Current: 25mA (±2)
• Trouble Analysis and Trouble Removal： The power indicator adopts light‑transmitting technology, and the signal lamp automatically detects the fault function inside, which can detect the fault in time. A signal light is added to the power processing to facilitate the judgment of whether the antenna is working normally or not. The red light indicates that the antenna is working normally.
• Simple Installation: Mount the roof antenna on the back of the car; Hold the antenna in place with a mounting nut on the inside of the vehicle; Pull the antenna output cable into the dashboard along the roof of the car; Connect the radio FM connector to the corresponding function position of the car radio; Connect the 12V power cord to the car power supply. If you cannot install it, it is recommended to find a professional installer to install

Specification:
Item Type: Car Antenna
Material: ABS+PVC
Radio Receiving Frequency Range: FM (87.5-108MHZ) AM (530K-1710KHZ)
Digital DAB Receiving Frequency Range: DAB (170-230MHZ) (1452-1492MHZ)
GPS+Beidou Frequency Range: 1561-1575.42MHz
Bandwidth: 10 (±0.5)
Standing Ratio: 1.5 (±0.5)
Gain: 15dB (±3)
Amplifier Gain: 15dB (±2)
Working Voltage: 12V
Characteristic Impedance: 75Ω
Current: 25mA (±2)
Fitment: Universal
How to Use:
1. Mount the roof antenna on the back of the car.
2. Hold the antenna in place with a mounting nut on the inside of the vehicle.
3. Pull the antenna output cable into the dashboard along the roof of the car.
4. Connect the radio FM connector to the corresponding function position of the car radio.
5. Connect the 12V power cord to the car power supply.
PackageList:
1 x DAB Active Antenna
1 x Antenna Rod
Note:
1. Please double-check the part number of your item, matching information is for reference only.
2. If you are unsure of the item, please turn to us before buying to avoid unnecessary return, thanks!