Gravel Binder for Bonding Stones and Gravel on Borders, Patios and Garden Paths. (Colourless – Garvel and Stone, 5 Litres)

• Surface fixative for indoor and outdoor use to decorate gardens, paths, roundabouts, traffic islands, etc., places where there is usually no human traffic, providing a decorative and functional finish. It does not change colour or yellow under solar radiation.
• Maintains the natural drainage of the aggregate agglomerate Compaction and fixation of crushed aggregates such as marble, stones, gravels. Good anchorage, hardness and outdoor resistance. Easy to apply.
• Cleaning Water Dilution Ready to use Consumption 800 – 1200 g/m2 varies depending on the aggregate Drying 4-5 h. depending on temperature and humidity Use Indoor / Outdoor Application with sprayer.
• METHOD OF USE 1. Homogenise the product before and during use. 2. The surface must be clean and dry. 3. Pour or spray the binder on the aggregate.
• 4. Allow to dry for 4 or 5 hours and if necessary repeat the operation. 5. Do not apply in damp or rainy weather. 6. In applications by surface spraying the consumption will depend on the granulometry of the aggregate that we are going to use, the consumption will be between 800 – 1200 g/m2 approx.

Surface fixative for indoor and outdoor use to decorate gardens, paths, roundabouts, traffic islands, etc., places where there is usually no human traffic, providing a decorative and functional finish. It does not change colour or yellow under solar radiation. Maintains the natural drainage of the aggregate agglomerate Compaction and fixation of crushed aggregates such as marble, stones, gravels. Good anchorage, hardness and outdoor resistance. Easy to apply. Cleaning Water Dilution Ready to use Consumption 800 – 1200 g/m2 varies depending on the aggregate Drying 4-5 h. depending on temperature and humidity Use Indoor / Outdoor Application with sprayer. METHOD OF USE 1. Homogenise the product before and during use. 2. The surface must be clean and dry. 3. Pour or spray the binder on the aggregate. 4. Allow to dry for 4 or 5 hours and if necessary repeat the operation. 5. Do not apply in damp or rainy weather. 6. In applications by surface spraying the consumption will depend on the granulometry of the aggregate that we are going to use, the consumption will be between 800 – 1200 g/m2 approx.