Vanguard VEO BA-185 ARCA to attach directly to an Arca compatible head (or to any quick release plate)

• The VEO BA-185 Arca Compatible Binocular Tripod Adaptor allows you to attach your binoculars directly onto a suitable Arca compatible tripod head for the most solid grip, without the need for a separate quick release plate
• Simply screws onto the binoculars between objective lenses
• Easy grip thread that allows it to be attached firmly to the binoculars with ease, even in gloves
• Thin bridge will allow it to fit all, but the narrowest of interpupillary distance
• Can also attach to any standard tripod, monopod or quick release plate with a 1/4" threaded screw

The VEO BA-185 Arca Compatible Binocular Tripod Adaptor allows you to mount your binoculars onto a tripod or monopod for stable viewing, either directly or on an Arca compatible tripod head without the need for an additional quick release plate. To attach the VEO BA-185 Arca to the binocular, simply take off the cap on the front of your binoculars between the objective lenses to reveal the 1/4″ threaded socket and screw in the adaptor tightly. To attach the VEO BA-185 Arca (and binoculars) directly to the tripod/monopod, then simply screw the adaptor onto the 1/4″ thread. Please note, it will not fit a 3/8″ thread that can be found on larger tripods. In this case, you will need to attach the VEO BA-185 Arca to a tripod head. To attach the VEO BA-185 Arca (and binoculars) onto an Arca compatible tripod head, simply place the base of the VEO BA-185 Arca into the clamp of your tripod head and tighten. This has the added advantages of the most solid grip with no risk of the adaptor loosening in use, no need to spend extra money on a spare quick release plate, and using a tripod head allows you to aim the binoculars much more easily. The VEO BA-185 Arca (and binoculars) can also fit onto any tripod head that is not Arca compatible, but it will need a separate quick release plate designed for that tripod head. Simply screw the adaptor onto the 1/4″ thread of the quick release plate and use the tripod head as normal. This retains the advantage of allowing you to aim the binoculars much more easily than on a tripod or monopod. Important Notes: Binocular must have a 1/4″ threaded socket (please check before buying) Intended for roof prism binoculars, but some 50mm (or larger) binoculars may have an smaller minimum interpupillary distance