ZDE ZP580A PoE HAT Board Compatible with Raspberry Pi 5 Power Over Ethernet HAT with Onboard Cooling Fan Supports 802.3af/at Network Standard

• The PoE HAT board is an 802.3af/at-compliant Power Over Ethernet (POE) expansion board for the Raspberry Pi 5. With Standard Pi 40PIN GPIO stackable header, allows connecting other HATs.
• Suitable for use with a PoE router or switch that supports the IEEE 802.3af/at networking standard. Providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
• Equipped with an onboard active cooling fan for better heat dissipation effect and more stable operation performance. If you don’t need to use the cooling fan, you can also disassemble it.
• Comes with onboard 5V & 12V header outputs. 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). Be able to power extra devices while providing stable power to Raspberry Pi.
• Onboard buck chip: Incorporates original voltage buck chip, providing up to 5A under sufficient heat dissipation condition.

Overview:
The ZP580A PoE HAT board is an 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. Suitable for use with PoE routers or switches that support the IEEE 802.3af/at networking standard, allowing the Raspberry Pi to be networked and powered over a single cable.

Features:
Based on standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5. Pin headers on the top for easy access to other Raspberry Pi expansion boards.
PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant.
Fully isolated switched-mode power supply (SMPS).
Onboard high speed active cooling fan, better heat dissipation effect and more stable operation performance.
Power Over Ethernet: providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Onboard 5V & 12V header outputs: 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). Be able to power extra devices while providing stable power to Raspberry Pi.
Onboard buck chip: Incorporates original voltage buck chip, providing up to 5A under sufficient heat dissipation condition.

Specifications:
POE input voltage: 37V-57V DC input
POE – GPIO header: 5V 4.5A (MAX)
POE – 2P header: 12V 2A (MAX)
Network standard: Support IEEE 802.3af/at PoE
Dimensions: 56.5 × 70.0mm
Weight: 38.7g

Packing List:
1 x PoE HAT Board
4 x M2.5x16mm Spacers
8 x M2.5x4mm Screws
Note: The Raspberry Pi 5, switch and Ethernet cable are not included in the package.