Catering Parts UK Manual Changeover Regulator Kit Wall Mounted 37mbar For 2

Catering Parts UK Manual Changeover Regulator Kit Wall Mounted 37mbar For 2 Propane LP LPG Gas Bottles Two Cylinders Static Carava

• 1 x LPG Gas Regulator 2 Cylinder Changeover Kit
• Manual changeover head
• 4kg/hr regulator type 700E
• 2 x 20" POL x W20 pigtails
• Hoses have built in Excess flow & non return valves
• 3/8" Male x 1/2" female outlet test point ball valve
• Includes screws, bracket & warning sign
• Please note: Thread sizes are in BSP and are not physical measurements. The BSP value refers to the internal bore of the pipe, the physical thread size will be larger than this. For example a 1/2" BSP male fitting would physically measure approx 21mm wide (using metric). See guide on the gallery photos for further help identifying BSP thread sizing.

2 Propane Gas Bottle Manual Changeover Kit 37mbar

Kit Includes:

• Manual changeover head
• 4kg/hr regulator
• 2 x 20″ POL x W20 pigtails
• 3/8″ Male x 1/2″ female outlet test point ball valve
• Screws, bracket, warning sign
• Excess flow & non return

Regulator Specifications:

• Inlet Connections: 2 x W20 (M20x1.5 male) (To fit supplied hoses)
• Outlet Connection: 3/8″ (1/2″ from the provided test point valve)
• Input Pressure: 16bar
• Output Pressure: 37mbar
• Output Rating: 4Kg/h
• Type Of Gas: PROPANE
• Diaphram Type: 700E
• EN 12864 Approved

PLEASE NOTE: The hoses supplied in this kit are for connection to standard UK POL (EN 16129 G.7) screw in type propane gas bottles ONLY (see gallery pictures for more details of this fitting).

Important Note: Although these are intended for outdoor use, the manufacturer recommends they are not continuously exposed to the elements. For this reason it is suggested to protect the regulator with a cover in order to shield it from rain and prevent any damage.

To connect the outlet valve to 8mm orange lpg gas hose a 1/2″ male fulham nozzle may be required. Please visit our Amazon store to purchase this.

We do advise that any parts are diagnosed, installed and tested by a suitably qualified engineer.

Please note: Thread sizes are in BSP and are not physical measurements. The BSP value refers to the internal bore of the pipe, the physical thread size will be larger than this. For example a 1/2″ BSP male fitting would physically measure approx 21mm wide (using metric). See guide on the gallery photos for further help identifying BSP thread sizing.