Water Pressure Booster Pump, 120W Pressure Booster Pump Hot and Cold Water with Pressure Booster Pump Irrigation System for Home, Garden, Law

• Specification – Power：120w,Max head: 15m/50ft for 120W,Max flow rate: 25L / min , 5gpm,Speed : 2850r / min,Cable: 1m/3.28ft,Product size: 20*12*10cm,Net weight: 3kg.
• Well Sealed Pump – Its copper pump body , copper impeller and stainless steel shaft are corrosion-resistant stainless . The whole pump is sealed well and the conveyed water won't be unhealthy total suction lift is high Flow rate is large.
• Automatical Pressure Boost Pump – The automatic switch adopts electronics theory , controlled by water current . It boosts pressure automatically when the tap is on , and turn off when the tap is off . It is used conveniently , and also saves power. It starts well , switches sensitively and automatically , and produces low noise . It also is designed to be low temperature , small volume , delicate appearance and long-time using .
• Centrigual Construction: – Pump body is designed to be gathered with auto more convenient . The automatic switch adopts the electric circuitry to control , less trouble . The impeller adopts the centrigual construction , mute design and some materious of the parts are copper.
• Fan Cooling: – The water-supply is much more sanitary because of the no-rust . the pump inside has the fan-cooling device to much more effectively to cool the temperature of the motor and long-time using.

:

This allows you to improve the efficiency of your shower, taps, washing machines, boilers and other appliances. It can also be used to pump water to the garage, fill ponds or increase pressure on the garden hose.

Specifications：

l Model: 15GR-15（120W）

l Voltage: 220V，50hz

l Power：120w

l Max head: 15m/50ft for 120W

l Max flow rate: 25L/min for 120W (5 gpm)

l Speed: 2850r/min

l Outlet: 3/4 inch 19mm

l Cable: 1m/3.28ft

l Material: Cast Iron

l Driving mode: Electric

l Impeller structure: semi open training impeller

l Transmission medium: clear water pump

l Impeller suction mode: single suction

l Performance: automatic

l Pump shaft position: side vertical

l Product size: 20*12*10cm

l Net weight: 3kg

Main Use:

l This pump solves the problem of inadequate water causing no lit Fire because when the tap water is of low pressure , the pump can boost pressure . It can also boost pressure for solar water heaters , boost pressure and circulate water for industrial equipment , and increase oxygen for rearing ponds or fish tanks

l GR hot water pump boost pressure and circulate hot water for boilers besides above using. GR hot-water type also can be used for circulation and pressurization of hot water. 15GZ best feature is that it can suck tap water from one or two floor below directly. so it completely solves the problem that the higher floors don’t have water while the lower floor has.

Packing List:

l 1 x120W Hot water pump

l 1 x power cord

l 1 x Operation manual

l 1 x Output test line