TurboBit Raspberry Pi 5 Performance Kit (Black, 16GB), ARGON Neo 5 Case (Active+Pasive Cooling), 128GB microSD, 27W 5.1V 5A USB C Power Supply, 2X HDMI Cables

• 【Raspberry Pi 5 with 16GB】 This advanced model impresses with two micro-HDMI ports that allow outstanding image output. Two USB 3.0 ports and two USB 2.0 ports are available for data transfer. For power supply, the Raspberry Pi 5 is equipped with a modern USB-C port. The Ethernet port enables fast data transfers at speeds of up to 1000 Mbps. The dual-band Wi-Fi, which supports both 2.4 GHz and 5 GHz, as well as Bluetooth 5/BLE.
• 【Argon NEO 5 (Black/Red)】 The Argon NEO 5 is redesigned specifically to meet the high demands of the Raspberry Pi 5. Impressive thermal dissipation solution for both passive and active cooling. Aluminum case enclosure with passive cooling fins that act as the heatsink. Air intake vents allow for cool air to enter the case. 30mm PWM fan helps with the airflow and pushes out hot air to exhaust vents. Made with aluminum alloy and polished with a Black & Red finish for stunning aesthetics.
• 【Raspberry Pi 5 Power Supply 27w】 It delivers a maximum of 5.1V, 5A enabling the Raspberry Pi 5 to power a wider range of peripherals. The total power drawn from the four USB ports on Raspberry Pi 5 is limited by default to a nominal 600mA. This limit is automatically increased to a nominal 1.6A when the USB-C PD Power Supply is detected. The USB-C PD Power Supply is also capable of delivering 3A at 9V, 2.25A at 12V, and 1.8A at 15V to PD-compatible products
• 【HDMI to Micro HDMI Cable 1 m】 This 1M white 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M) cable features nickel-plated plus, is both RoHS and 4Kp60 compliant and has 3Mohm 300VDC insulation that can withstand 300VDC for 0.1s
• 【128 GB microSDHC】 Pre-installed Raspberry Pi OS Bookworm (64x)

---

Product Description

Raspberry Pi 5 Hardware Specifications

SoC	BCM2712 SoC Arm Cortex-A76 64-bit CPU running at 2.4 GHz
SoC	800 MHz VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
Display	2 x 4Kp60 HDMI display output with HDR support
RAM	1,2,4,8GB LPDDR4X-4267 SDRAM
Storage	Micro SD (SDR104 compatible) M.2 NVMe SSD via M.2 HAT
GPIO	40 Pin Raspberry Pi HAT Compatible
USB	2 x USB 2 / 2 x USB 3 (simultaneous 5Gbps)

Connectors	2 × 4-lane MIPI camera/display transceivers, PCIe 2.0 x1 interface, UART breakout, RTC clock power, Fan power
Networking	Gigabit Ethernet, PoE via PoE+ HAT
Wi-Fi / Bluetooth	Dual-band 802.11ac, Bluetooth 5 / BLE
Power Button	Soft power button
Power	5V 4A via USB C / PoE via Poe+ HAT / 5V via GPIO
Dimensions	85 x 56mm

Installation

The Argon NEO 5 actually offered the lowest idle temperatures out of any of the Raspberry Pi 5 coolers tested thus far. At 48.3 degrees Celsius, it was 1.2 degrees cooler than the Raspberry Pi Active Cooler, and 0.9 degrees below the 52pi ICE Tower (with its default fan).

When we move to the full load side of things, it gets even better for the NEO 5, as it offers a 7.5-degree drop over the ICE Tower.