A ABSOPRO 100mm Fuel Sending Unit and Gauge Kit 3.9″ Boat Fuel Tank Sending Unit
A ABSOPRO 100mm Fuel Sending Unit and Gauge Kit 3.9″ Boat Fuel Tank Sending Unit Fuel Water Level Sensor and Fuel Gauge for Boat Car Truck RV
- Fit for:Read accurately the fuel gas gauge displays the water gas fuel level information in the boat marine RV car truck tank, no need to worry about how much water gas fuel is left.
- Product Information:The maritime gasoline sender unit can be easily severed, depending on the depth of the tank. It is capable of flexible movement in confined areas, in the correct direction, by loosening the central screw for rotation and subsequently tightening it again. Alternatively, it can be cut as needed.
- Details:The Fuel/Water Level Sensor with standard output of 240-33 ohm.
- How to use:To ensure an accurate reading, first check the tank depth to make sure the length is proper. The marine gasoline tank sender unit length should then be shortened or adjusted into the tank. At last, connecting to the dashboard gauge.
- Tip:Along with the tank's adjacent wall or baffle, there must be a minimum of one inch (25 mm) of space between the float retaining collar and the tank bottom.
- Fit for:
- The Marine sending unit is suitable for cars and ships, trucks, buses, boats, etc.
- Product Information:
- Output Signal: 240-33 ohm
- Materials: Metal
- Length: 100mm /3.94"
- Product Highlights:
- A durable fuel water-sending unit is intended for a long service life.
- The fuel sensor is easy to install and use, fix the sensor, then connect the wiring and it will start working.
- Fuel-sending units for boat tanks are widely used in fuel, water, kerosene, and chemical tanks, generators/generator sets, and marine field.
- Made of:
- Applying the principle of the magnetic field to control the reed on-off switch, featuring strong corrosion resistance, long using life, anti-vibration, anti-explosion, etc.
- How to use:
- How to use fuel gas sender:
- 1. Just connect a ground blue wire from the marine fuel sending unit to a common grounding hook-up. The blue wire connects to the negative pole of the power supply.
- 2. And connect the signal red wire from the fuel level sending unit to the gauge hook-up.
- Content:
- 1 Set Fuel Sending Unit and Gauge
- Tip:
- Please allow 1-2mm error due to manual measurement.
| SKU: | B0DNFS21X5 |
| Weight: | 340 g |
| Dimensions: | 22 x 8.51 x 8 cm; 340.19 g |
| Brand: | A ABSOPRO |
| Manufacture: | A ABSOPRO |
| Reference: | aopro240814001173 |
Product Description
- Fit for:
- The Marine sending unit is suitable for cars and ships, trucks, buses, boats, etc.
- Product Information:
- Output Signal: 240-33 ohm
- Materials: Metal
- Length: 100mm /3.94″
- Product Highlights:
- A durable fuel water-sending unit is intended for a long service life.
- The fuel sensor is easy to install and use, fix the sensor, then connect the wiring and it will start working.
- Fuel-sending units for boat tanks are widely used in fuel, water, kerosene, and chemical tanks, generators/generator sets, and marine field.
- Made of:
- Applying the principle of the magnetic field to control the reed on-off switch, featuring strong corrosion resistance, long using life, anti-vibration, anti-explosion, etc.
- How to use:
- How to use fuel gas sender:
- 1. Just connect a ground blue wire from the marine fuel sending unit to a common grounding hook-up. The blue wire connects to the negative pole of the power supply.
- 2. And connect the signal red wire from the fuel level sending unit to the gauge hook-up.
- Content:
- 1 Set Fuel Sending Unit and Gauge
- Tip:
- Please allow 1-2mm error due to manual measurement.