DCHOUSE NO.1000 Watch Timing Machine Tester Tools Multifunction Timegrapher

DCHOUSE NO.1000 Watch Timing Machine Tester Tools Multifunction Timegrapher Watch Timing Calibration Tool Watch Tool for Mechanical/Automatic Watches Wristwatch

• ☆ The watch’s frequency graph can be viewed on the LCD screen. Six kinds of test positions can be set, and the simulation sound can be played in the speaker or mute.
• ☆ According to different watches, the instrument will automatically adjust the optimal signal level during the test.
• ☆ The instrument automatically calculates the rate deviation, amplitude, stroke error and displays them through the data in real time. Select ± 99.9 s / d in the item rate range for the result display, which can make the rate deviation accuracy up to 0.1 s / d.
• ☆ For the conventional beat, the instrument can automatically response; for the special beat, can manually select.
• ☆ The sampling time can be in 2 seconds, 4 seconds, 6 seconds, 8 seconds, 12 seconds, 20 seconds, 30 seconds, 60 seconds, and the average value of the corresponding period is regarded as the exact value of the watch.

:
The No.1000 is a precise mechanical watches test instrument, it is used for multi-testing by watch manufacturers and watch technician.
1. Beat Numbers (Frequency Numbers):
The following beat numbers are selected by automatic selection mode:12000,14400, 18000, 19800, 21600, 25200, 28800, 36000, 43200.
(If the tested beat is not in automatically selection, the instrument will display the closest beat number,but the test result is not correct. At this time, use the manual mode to select the relative beat.)
Manual selection can selected out the beat number that Automatic select can not identify and rare beat number.
The following beat are selected by Manual selection mode: 3600,6000, 7200, 7380, 7440, 7800, 9000, 9100, 10800,11880,12000,12342,12480,12600,13320,13440,13500,14000,14040,14160,14200,14280,14400,14520,14580,14760,14850,15000,15360,15600,16200,16320,16800,17196,17258,17280,17786,17897,18000,18049,18514,19332,19440,19800,20160,20222,20944,21000,21031,21306,21600,25200,28800,32400,36000,43200.
2.Lift Angle:
The lift angle is 52° for many common movements therefore the lift angle value of instrument for factory is set to 52°. This value is required to calculate the amplitude and must be selected according to the watch movement. The lift angle can be set to between 30°and 70°.
3.Period:
The measuring period selectable 2s、4s、8s、10s、20s、30s、60s. Use to recalculate the average values of the test result.
Common Faults & Handling
1. After insert the socket, the screen is dark. Check the power pilot LED is bright or not.
2. The instrument can enter testing state with the sound of “Di”, but after placed the watch on the sensor, the instrument do not work. Check the second hand whether rotation (and amplitude must be more than 100 °),the crown of watch (leading) is against at the sheet metal of sensor.
Package Include:
1pc Mechanical Watches Tester