Martindale PD240 240 V Proving Unit, Yellow Bundle with Kewtech KEWCHECK R2

Martindale PD240 240 V Proving Unit, Yellow Bundle with Kewtech KEWCHECK R2 Socket Testing Adaptor – Test Without Removing Wall Socke

• Product 1: Safely and simply proves the operation of multi-meters and voltage testers
• Product 1: 240 V DC output proving unit
• Product 1: Compact size with belt clip
• Product 1: Essential for implementing effective safe isolation
• Product 2: Saves having to remove sockets from the wall and potentially damage the decoration
• Product 2: Works with Insulation / Continuity testers and Multi-function testers that use 4mm connectors
• Product 2: For fast connectionof 4mm test lead connectors
• Product 2: Takes away the need to remove socket from wall

The PD240 Proving unit is a convenient pocket sized, battery powered proving device that produces a 240 V DC output. Any device used for voltage detection and for proving dead should be tested before and after use to ensure the safety of the operative. The PD240 current is limited to 2 mA and is suitable for use with multimeters and other voltage detectors that have an input impedance greater than 120 KΩ. It has a long battery life and comes complete with a belt clip.

The Kewtech R2 Socket adapter is an essential accessory for fast testing without removing the UK wall socket outlet. It saves time and is safe. The Kewcheck R2 enables good connection to the electrical wiring installation with 4mm test probes without taking the 3 pin socket off the wall. It facilitates R2 and R1 + R2 measurements as well as voltage detection at wall socket outlets. With the phase and earth conductor linked at the distribution board, your continuity tester probes are placed in the phase (R1) and (R2) 4mm sockets on the KewCheck R2 and then a reading is taken before moving onto the next socket. The Kewtech Kewcheck R2 Socket Test Adapter is suitable for a wide range of Continuity testers and test meters from Kewtech, Megger, Robin, Metrel, DiLog, Alphatek and Seaward. Use the Kewtech R2 plug in test adapter to speed up periodic 17th edition testing and Part P testing of UK electrical installations.