2″ Petrol Water Pump, 4 Stroke 6.5HP Engine with 7 m Suction Head, 210CC Dirty Water Pump for Water Supply and Drainage

• STRONG POWER: The 4-stroke 6.5HP engine with high power (4.8KW) and large displacement(210cc), as well as a deepened and enlarged cylinder, allows this product to reach a high speed (3600rpm) and large flow (36000L/h) to suck in 7m/23ft of water and lift it to 28m/92ft.
• EASY OPERATION: You can start the machine by pulling, and use the flameout switch to emergency brake the water pump. The pull plate/crankshaft/piston helps to start/drive/compress respectively. Even novices can operate it easily.
• QUIET & FUEL-SAVING: The built-in silencer can reduce the noise (about 96dB) when in use, which can well protect your hearing and create a quiet environment for you. The high-quality carburetor can fully atomize the fuel. Meanwhile, low fuel consumption (0.65L/h) can reduce your use costs.
• THOUGHTFUL DESIGN: Multiple sealing rings can prevent water leakage and the square frame can well protect the water pump while reducing the vibration during use. Meanwhile, the gear is helpful for speed regulation, and the upgraded speed-regulating gearbox with fast heat dissipation and wear resistance can ensure 96 hours of operation without flameout.
• MULTI-SCENARIO USES: This water pump is suitable for farmland, fruit field, vegetable garden, and car washing, and can be used for flood control and drainage, engineering construction, well water intake, long-distance water transmission in farmland, large-scale sprinkler irrigation in gardens, fire water, fish pond breeding, etc.

---

Product Description

WHAT YOU WILL GET

• 1* Water Pump
• 1* Inlet Pipe Connection
• 1* Outlet Pipe Connection
• 1* Sleeve Rod
• 1* Filter
• 4* Foot Pads
• 1* Manual
• Other Accessories for Assembly

MULTI-PURPOSE USES

It can be used for agricultural irrigation, treatment of industrial wastewater, tunnel drainage, road cleaning, alpine water conveyance, flood control and drainage, engineering construction, water extraction from machine wells, fire-fighting water, fishpond aquaculture, and so on.

TECHNICAL SPECS

Material	Aluminum, Iron, Plastic
Process	Spray Molding, Welding
Engine Type	Single-cylinder, 4-stroke, Air-cooled, Petrol Powered
Starting Mode	Manual
Power & Horsepower	4.8kw, 6.5hp
Speed	3600rpm
Displacement	210cc
Fuel Tank Capacity	3.6L/0.95Gal

Fuel Consumption Rate	360ml/kw.h
Engine Oil Capacity	0.6L/0.16Gal
Noise	About 96dB
Intake & Outlet Diameter	2 Inch / 5cm
Pump Lift	28m/92ft
Pump Output	36m³/h | 1271.33ft³/h (9510GPH)
Self-suction Height	7m/23ft
Weight	18.45kg/40.68lbs

2″ Enlarged Inlet & Outlet

Its inlet and outlet have been enlarged to a diameter of 2 inches, which allows for a larger flow rate for a wider range of watering and suction.

Air & Water Filters

The filters can effectively isolate impurities in water and air, prevent blockage of water pipes and water pumps, and improve working efficiency.

Snap-on Fuel Tank Cap

It makes the fuel tank seal better, reduces evaporation, and saves fuel.

NOTES

1. Please fill the pump head with water before starting to avoid damaging the pump head. The machine needs to be filled with petrol and four-stroke engine oil before use to prevent cylinder explosion due to insufficient lubrication and overheating.
2. Please do not use the machine indoors or in a damp environment. Please keep the product away from inflammable items.
3. Please turn off the machine and do not smoke when refueling. Please do not add excessive fuel to avoid potential danger caused by fuel overflow.
4. Please read the manual completely before use, and pay particular attention to the safety instructions included.